1.800.667.8721
 
Today's Deals, See What's On Sale Now!

Rolling Shelves Do-It-Yourself Cabinet Pull-Outs for Kitchen, Bathroom, Closet, Storage or anywhere

Each shelf is sold individually
Do-It-Yourself Cabinet Pull-Outs
View 1
Do-It-Yourself Cabinet Pull-Outs
View 2
Do-It-Yourself Cabinet Pull-Outs
View 3
Do-It-Yourself Cabinet Pull-Outs
View 4
Do-It-Yourself Cabinet Pull-Outs
View 5
Do-It-Yourself Cabinet Pull-Outs
View 6
$48.92 - $62.98
No Sales Tax, Except CT
Shipping:
 Free S/H on Rolling Shelves orders over $99!
Model:
Choose a product from the options above
Qty?
View Cart

Product Reviews

4.7 20

Features:

  • As seen on TV, save money with our famous do it yourself shelves!
  • Front, Side, Back and Bottom Constructed of Imported Baltic Birch
  • Each shelf is sold separately/ individually
  • Can hold up to 75 lbs with standard guides (including the weight of shelf). Optional Full Extension Guides, increase the capacity up to 100lbs ( including the weight of the shelf)
  • Shelves come 30" wide and require an opening of at least 31" W, spaces are included for up to a 32" opening. Can be installed onto a cabinet's floor or full shelf with the optional "Mount to Shelf" bracket kits - sold separately under accessories below, with the brackets installed, the finished shelf can fit into openings larger than 32-1/2"
  • Drawer is 3-1/2"H and required 4" Height clearance
  • Kit comes in 30" W and can be sized down accordingly to fit almost any in cabinet openings, from 6" to 30" wide
  • Optional accessories available separately
  • These products are custom items. Not cancelable after 3 days. Not returnable
  • Assembly Required




    Optional Accessories: Click here to purchase
  • Full Extension Ball Bearing Slides allow you to extend your new shelf completely so you can access all the items in the back of your cabinet
  • Rear mount socket sets are required for those installations where you cannot mount the rolling shelf to or an existing full-depth shelf or cabinet bottom. This would allow you to mount instead to the front frame of your cabinet and the back wall of the cabinet. Mount to shelf brackets makes installing the pull out shelves a little easier. They mount directly to existing full depth shelves or the floor of a kitchen cabinet.
  • Install Instructions
  • The kits includes 3/4 Extension guides, hardware, and instructions Click to View Guides
  • The unfinished shelves are available in a natural, hand sanded finish so they can be stained to match the customers existing cabinetry. Click to View Image
  • The pre-finished shelves are available with clear coat so they look like natural maple Click to View Image
  • Click Here to View Images of Optional Accessories


Optional Care Products:
Board Cream to Protect Wooden Products
5 oz. Tube - Available in a 3 or 12 Pack *Combination of natural un-bleached beeswax & mineral oil *Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
Oil Care for Wood Products
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack *Mixture of white mineral oil & beeswax *Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
Non-Toxic Polyurethane Gel for unfinished products
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case *Makes repairs and fabrication a foolproof operation *Can be used to touch-up tables with Varnique or Tuff-Var finish *Can also be used on oil finish tops to convert them to varnique tops

Description:

These Do It Yourself Cabinet Pull-Outs from Rolling Shelves make it easy to reach everything in your cabinets. Made of Baltic Birch with a Melamine bottom, the cabinet pull-outs have dovetail grooves that lock together to ensure a strong shelf. All kits come 30" wide and can be sized down to fit cabinet openings from 6" to 32-1/2" wide. The 22" deep shelves actually measure 21-3/4" deep and will fit cabinets that are 22" to 24" deep, and the 20" deep shelves actually measure 19-3/4" deep and will fit cabinets that are 20" to 22" deep. The cabinet pull-out shelves come pre-finished, with a clear coat for a natural Maple look, or unfinished, hand-sanded and ready to paint or stain.


Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

20" D or 22" D
20"D shelves measure 19"-3/4 D (fit cabinet depths from 20" - 22" D)
22"D shelves measure 21"-3/4 D (fit cabinet depths from 22" - 24" D)
Sides and Back:1/2" Thick
Front: 3/4" Thick
Bottom: 1/4 " (with a white vinyl covering)
Accessories:
BU-CO257
Rolling Shelves Do-It-Yourself 20" Full Extension Slides, Requires mount to shelf brackets if mounting unit to a shelf
Weekly Deal: $38.33
List Price: $58.27, You Save: 34%,   No Sales Tax, Except CT
How Many?
BU-CO258
Rolling Shelves Do-It-Yourself 22" Full Extension Slides, Requires mount to shelf brackets if mounting unit to a shelf
Weekly Deal: $39.16
List Price: $58.27, You Save: 33%,   No Sales Tax, Except CT
How Many?
BU-CO259
Rolling Shelves Do-It-Yourself Pair of Rear Mount Sockets, For 3/4 Extension slides
Our Price: $12.63
List Price: $18.05, You Save: 30%,   No Sales Tax, Except CT
How Many?
BU-CO260
Rolling Shelves Do-It-Yourself Mount to Shelf Brackets
Our Price: $15.69
List Price: $22.42, You Save: 30%,   No Sales Tax, Except CT
How Many?
BU-CO261
Rolling Shelves Do-It-Yourself Rear Mount Sockets For Full Extension Slides
Our Price: $13.86
List Price: $19.80, You Save: 30%,   No Sales Tax, Except CT
How Many?
Ship Method:

    Ships via UPS/FedEx Ground


Product Reviews:
Great!
by: Andy     from: Cameron Park, CA      on: June 2, 2014
 A bit expensive for 5 pieces of routered wood. BUT... they are the only self-install, fully width customizable units I've found. Don't be fooled by the easy-sounding instructions. You DO need to have some "handyman" in you to get this job done. The instructions are VERY VAGUE on how to install the stilders. OVerall... I WOULD buy them again.


GREAT!
by: SMR     from: -, IL      on: April 24, 2014
 I have a small kitchen so storage space is limited. I love my pull outs I bought from kitchen source! The instructions were a little hard to figure out, but my hubby and I cut/assembled and installed two pull-outs in an afternoon. I love how they look custom and NOT cheap! I will be ordering more in the near future! Thanks!


Drawer pull outs
by: Glenda     from: Wampum, Pa      on: April 15, 2014
 Nice drawers directions need to be made a little better . This is the only reason I gave it four stars


Great pull out
by: Ed     from: Lacey, Wa      on: January 8, 2014
 Product is well made and easy to assembly with basic carpenter skills. A great investment to the kitchen. The wife loves them.


a good product
by: John Pennington     from: San Francisco, Ca      on: September 28, 2012
 I bought 4 shelves. The directions are good, and should be followed precisely. (Many aren't.) Two of the bottoms were not quite square in my order, requiring a little trimming, but they installed fine. A good bit of work is required, with some 40 small screws for each drawer. Installation is awkward for any cabinetry, this included. My drawers were a bit too wide, probably due to my inaccurate measurements, but fit fine when I sanded down the spacers. The finish could have been smoother. I did some light sanding and put on some rubbing varnish.


Good product.
by: Joe Shevchik     from: Ebensburg, PA      on: July 9, 2012
 Directions were good. They work well.


Perfect fit
by: Mindy     from: Pennsburg, PA      on: March 13, 2012
 For years, we had been living with pull out drawers in the top of the lower cabinets, but not in the bottom. It was a chore to use any of the items on the bottom shelf of the lower cabinets. These sliding drawers make everything so much more accessible. The slide out shelves arrived in good time and my husband said the measurements were right on the money. The installation was easy and both cabinets were completed in an hour. Now we are using pots and pans that had been hidden from view.


Easy to install
by: Jim Killingsworth     from: Palmetto, FL      on: August 25, 2011
 This is one of the easiest DIY projects my wife had me do. The Instructions were easy to follow and the parts fit without any modifications. The final results was better than expected. I recommend this DIY project to anyone.


Very nice product
by: Richard     from: Gaylordsville, CT      on: January 31, 2011
 Quality made. Not for the novice. A miter saw or radial arm saw along with a table saw will make this look like a professional install. You can use a circular saw if need be. Instructions were accurate and easy to follow. The hardware provided was very adequate, The best part is that my wife is overly pleased with the product (as I am!).


Very pleased
by: William Kover     from: Piscataway, NJ      on: November 17, 2010
 The pull out drawers were easy to install, and work great.


Very Satisfied
by: Steve Donohoe     from: Springfield, VA      on: November 17, 2010
 Very precise product. The directions should be a little more detailed. The product is only as good as the installer.


Well Built
by: Jeff Artabasy     from: MADEIRA BEACH, FL      on: August 25, 2010
 This product was very well built and conformed to my cabinet with a few minor adjustments. My only criticism is the directions were a bit vague and confusing but after carefully studying it all was ok. I will buy a least two more of these drawers.


Very Happy With Purchase
by: Jeff     from: Shasta Lake, Ca      on: January 19, 2010
 Fun project and Planning to install tomorrow. I stained and varnished the shelve. They look great and will be help in the kitchen. I would recommend this to friends.


Great!
by: Greg White     from: San Diego, CA      on: December 3, 2009
 Built a custom base cabinet. These cut to fit shelves were a perfect solution for my none standard cabinet size. The shelves are well machined, assembled easily and nicely took our finish without much preparation. Would definitely reccomend them to anyone looking to improve their cabinets and contents accessibility!


Great!
by: Donna     from: Chester, MD      on: October 2, 2009
 I love these shelves! They have made a real difference in how accessible my pots and pans are in a very inefficiently laid out old kitchen. You need to be handy to put them together but with the right "handy man" they make all the difference in the world!


Great product. Easy to install.
by: Gilbert     from: Fort Collins, CO      on: August 26, 2009
 I just installed 4 of these shelves in my pantry and they work great! I don't have much in the way of carpentry skills but the instructions were easy to follow. I would recommend these shelves.


Wife loves the sliding drawers.
by: Charles R. Rosales     from: Copperas Cove, TX      on: August 3, 2009
 The kit required little effort to cut to size and assemble. The instructions were easy to read and follow. Only difficulty I experienced was aligning the rails. In my case, the rails were attached only on the front and rear of the cabinet and care had to be taken to ensure correct alignment.


Great product
by: Harry Whiting     from: Niceville, FL      on: July 14, 2009
 I LOVE the drawers as does my wife.....hence 3 more! Thanks for such a great product.


Great product!
by: Toni     from: Norwood, MA      on: July 9, 2009
 Our set didn't come with instructions, but we were able to access them from the website. Easy to assemble! Worth the $ and definitely worth the savings by doing it ourselves!


Great product!!
by: Toni     from: Norwood, MA      on: July 9, 2009
 Our set didn't come with instructions, but we were able to access them from the website. Easy to assemble. Worth the $ and definitely worth the extra savings by doing it ourselves!


Your questions that we answered:
I have a 27 1/2 inch wide cabinets. Is it possible to roll out shelves made at about 26 inches wide? Thanks!   - Asked about product BU-CO253
 This particular pull-out shelf is only available in 30’’W however, there is a Pre-Assembled “Express” Cabinet Pull-Out Shelf that is available in the 26’’W, here: http://www.kitchensource.com/cabinet-organizers/bu-co201.htm
 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)

Is the depth of these modifiable, as well? Thanks   - Asked about product BU-CO255
 While, the Width of this Pull-out Cabinet can be sized down to fit cabinet openings between 6" to 32-1/2" wide, the Depth cannot be modified. This cabinet pull-out is only available in Depths of 20’’ (measures 19-3/4’’D and fit cabinet depths from 20" - 22" D) or 22’’ (22"D (measures 21-3/4’’D and fit cabinet depths from 22" - 24" D)
 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1)

Does this shelf come in 20in wide? Thanks   - Asked about product BU-CO256
 These shelves can be sized down accordingly to fit almost any in cabinet openings, from 6" to 32-1/2" wide.
 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)

I have a base kitchen cabinet that is 33" wide ( 30" between front frames ). it's 22 3/4 " deep from back of cabinet to front frame. Will the above work? if so, what hardware should I buy?   - Asked about product BU-CO253
 These cabinet pullouts are a DIY product that is shipped "knocked down". The pullouts need to be cut to the desired width and assembled.

If you are installing as is, it will fit into a 31-32" opening.

All of the hardware is included for normal installation however, if you’re looking to mount on the floor or onto a full depth shelf, the ‘Mount-to-Shelf brackets (BU-RSMTS101) might be helpful and can be purchased by contact our Customer Service Specialists, directly at 800-667-8721.

 100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0)

Can the drawers be mounted with side-mount slides? What additional accessories would I need? Thanks.   - Asked about product BU-CO253
 All Rolling Shelves guides can be side mounted. The shelves come with 3/4” extension guides shown on this page: http://www.kitchensource.com/cabinet-organizers/bu-guides.htm You may have to shim the space between the drawer slides and the interior cabinet walls, for an accurate fit.
 100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0)

If the rolling pull out shelf mounts to the existing shelf, why is the max cabinet opening limited to 32.5"?   - Asked about product BU-CO255
 This product can be installed onto a cabinet's floor or full shelf with the optional “Mount to Shelf” bracket sold separately under accessories on the page. With the brackets installed, the finished shelf can fit into openings larger than 32.5"
 100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0)

will these fit the standard IKEA 30" kitchen base cabinets?   - Asked about product BU-CO253
 For a 30" opening, you should order a 28" Shelf, available on this page - http://www.kitchensource.com/cabinet-organizers/bu-co201.htm
 100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0)

Can you tell me, I am assuming price is for one shelf. picture shows two and description says shelves. I want to make sure I order the correct amount. Thank you   - Asked about product BU-CO256
 Yes, the price is for one shelf.
 100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0)

Do these shelves come with all the hardware to mount in a cabinet?   - Asked about product BU-CO254
 Yes, it comes with the mounting hardware.
 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2)

ROLLING SHELVES BU-CO473,BU-CO258 AND BU-CO260. DO YOU HAVE A PICTURE DETAILS HOW TO MOUNT ROLLING SHELVES IN EXISTING CABINETS.WHERE DOES THE L BRACKETS MONTH TO REAR WLLL OR BASE CABNET SHELF   - Asked about product BU-CO256
 This product does not use L-Brackets. This picture shows how the glides are mounted: http://www.kitchensource.com/cabinet-organizers/images/bu-guides.jpg
 0% of 1 people found this useful. Was this useful to you? Yes (0) | No (1)

Reference:

    This item(s) is also sometimes listed under the following manufacturer numbers:

    CO253, CO254, CO255, CO256

  Customer Service
  About Us
Contact Us
Gift Certificates
  Order Status
Shipping Info
*Return Policy
  Privacy Policy
Security Info
Testimonials
  Product Index
Fair Price Guarantee
Affiliate Program

The Truth About KitchenSource Coupons

Sign up for specials:
Testimonials internet retailer top 500 e-retailers KitchenSource.com is a BBB Accredited Business. Click for the BBB Business Review of this Kitchen Accessories in Stratford CT
 

pay by credit card or electronic checkpay by credit card or electronic check   Fast Checkout through Google

 

an Aoife Company LLC Store
1136-1146 Stratford Avenue, Stratford, CT 06615
Tel: (203) 374-5425    Fax: (203) 373-0810
email: support@kitchensource.com