This Soft-Close Base Cabinet Organizer glides effortlessly on Rev-A-Shelf's patented soft-close "tri-slides" which minimize any side-to-side motion and provide complete stability when pulled out of cabinet. The pull-out is designed for full height face frame kitchen base cabinets without drawer and features concealed slides, adjustable shelves with Chrome retaining rails and micro-adjustable screw for precise door alignment. The adjustable rear wall prevents items falling behind the pull-out, and the adjustable rub bushings prevent side to side movement and frame rubbing. The pull-out can be door mounted easily with Rev-A-Shelf's patented door mount brackets that provide up to 5" of flexibility for trouble-free installation on any door style.
The end result was awesome. The product is well made, well designed and functions perfectly. The downside is that the instructions are minimal and installation was quite frustrating.
Just what I expected! by: Kate from: Columbus, Oh on: December 23, 2013
This was the last piece to my remodel, and it's just as expected. Adjustable shelves, easy to install. Thank you!
Love the shelf, bad instructions by: CJ from: -, Wi on: January 18, 2013
Absolutely love the shelf. Looks great, works great, arrived on time with no damage. The only problem is with the instructions. If you don't already know how to install these it will take you a lot longer than they say. I am not a novice at handywork and woodworking, but the instructions say ~30 minutes and it took me over 3 hours. Ineffective, poorly written instructions.
I have 5-inch clearance between 2 wall cabinets (one is a cabinet for cooktop). While filler panel works, would this item work for me or should I look for a 3 inch wide model just to have some space clearance? In other words, what space is needed to fit in this pullout organizer? Also, can I put the filler that matched my kitchen cabinet doors on the front to match? Thanks - Asked about product RAS-448-BCBBSC-5C
Per Rev A Shelf, this item is 5" W. If you have a frameless cabinet, you would need 5" W space to fit it. However, if you have a framed cabinet, it requires a 5 1/2" Opening instead. You can add your own cabinet door to the front of the pull out unit to match your cabinetry as this item does not come with a cabinet door.
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)