Quick-Set Drilling Jig for Handles
Our Price: $55.68
List Price: $69.60, You Save: 20%, No Sales Tax, Except CT
- Drilling jig for handles
- For precise drilling and positioning of handles on doors, flaps and drawer fronts
- Convertible side stop, can be used horizontally and vertically
- Material: plastic with hardened drilling bushings
- Drilling bushings: for drilling Ø 4.3 - 4.6 mm (11/64”-3/16”)
- Drill hole spacing: adjustable from 64 -143 mm (2-1/2”-5-5/8”)
- Distance from edge: adjustable from 26 -103 mm (1 1/16”-4 1/16”)
This Quick-Set Drilling Jig by Hafele makes it easier to install and position handles on doors, drawers and flaps more precisely. The drilling jig is made of plastic with hardened drilling bushings and has a convertible side stop that can be used horizontally and vertically. Drill hole spacing is adjustable from 64-143 mm (2-1/2" - 5-5/8") and the distance from the edge adjusts from 26-103 mm (1-1/16" - 4-1/16").
(W = side to side) (D = front to back) (H = top to bottom)
for drilling Ø 4.3 - 4.6 mm (11/64”-3/16”)
Drill hole spacing:
adjustable from 64 -143 mm (2-1/2”-5-5/8”)
Distance from edge:
adjustable from 26 -103 mm (1-1/16”-4-1/16”)
Ships via UPS/FedEx Ground
|Quick setup, alignment without problems!
by: Mike from: Magnolia, Tx on: January 23, 2014
| ||Needed to find a drawer pull that would cover over 4" pulls. This is so easy to align and setup. They shipped it and had it in a few days! Great service!
by: SJS from: St. Louis, MO on: March 2, 2012
| ||This jig saved me hours upon hours of time measuring each cabinet door and drawer. It also gave me the confidence to measure and drill, assuring consistency. I was able to complete a large kitchen in under 2 hrs. The only limitation this jig has is if you're trying to put hardware on larger drawers where the size is beyond the limits of the jig.
|Great way to have cabinet hardware mounted perfectly!
by: Dwight from: Murphy, NC on: March 2, 2012
| ||This drilling jig is easy to use. It make mounting cabinet hardware quick and accurate.
by: MIchael Warnken from: rio rancho, nm on: January 3, 2012
| ||Did its job very well and save me the cost of carpenter or cabinet person coming to do it.
|This was a gift for someone else. I Have mine.
by: Ara G from: Chatsworth, CA on: August 25, 2010
| ||I bought the guage for a fiend who is a professional cabinet maker. I do have my own and have used it in many occasions.
|Does it extend to fit drawers 14"—30 inches? - Asked about product HA-001.31.233
| ||"This is intended for:
Hardened drilling bushings: for drilling Ø4.3–4.6 mm (11/64""–3/16"")
Drill hole spacing: adjustable from 64–143 mm (2 1/2""–5 5/8"")
Distance from edge: adjustable from 26–103 mm (1 1/16""–4 1/16"")
Convertible side stop, can be used horizontally and vertically"
| ||0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)|
This item(s) is also sometimes listed under the following manufacturer numbers: