$109.84 - $235.72
No Sales Tax, Except CT
Optional Care Products
- Countertop straight tambour kitchen appliance garage
- Great for storing your appliances while complementing your cabinetry at the same time
- Available in Red Oak, Cherry, Hickory, Maple and Alder finishes
- Choice of veneer or solid tambour door mounted to solid wood frame
- Comes in 3 Widths: 18", 24" or 30" width
- Doweled joints
- Smooth non-binding operation
- End panel are faced sides with matching veneer
- Prefabricated for simple installation
- Unfinished - Ready for staining or painting
- Assembly required
5 oz. Tube - Available in a 3 or 12 Pack
*Combination of natural un-bleached beeswax & mineral oil
*Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack
*Mixture of white mineral oil & beeswax
*Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case
*Makes repairs and fabrication a foolproof operation
*Can be used to touch-up tables with Varnique or Tuff-Var finish
*Can also be used on oil finish tops to convert them to varnique tops
The Straight Appliance Garages are great for storing your appliances while complementing your cabinetry at the same time. These units are available in Red Oak, Cherry, Hickory, Maple and Alder finishes, with your choice of a veneer or solid door.
(W = side to side) (D = front to back) (H = top to bottom)
18" W x 11-7/8" D x 18-1/2" H
24" W x 11-7/8" D x 18-1/2" H
30" W x 11-7/8" D x 18-1/2" H
Ships via UPS/FedEx Ground
|great piece of furniture
by: JoAnn Simon from: Hemphill, TX on: September 3, 2013
| ||The island that I purchased is great. I did not put on the wheels because I wanted it as a buffet. It fits great and is beautiful.
|Nice construction. Easy to install.
by: Sue Francesconi from: Naperville , Il on: July 29, 2013
| ||Would recommend !
|the appliance garage came out real nice.
by: linda from: salida, ca on: February 27, 2012
| ||The appliance garage came out real nice. It really added to the finished look of the kitchen.
|Item as described
by: Richard A from: Tucson, AZ on: October 12, 2011
| ||The appliance cabinet was as descibed. I finished it with a neutral stain and protective coating and it matches my exisiting cabinets.
by: walter riesen from: wilmington, oh on: March 5, 2010
| ||Excellent. Easy assembly and very professional looking when finished. Easy to operate the door.
by: Dana METZ from: Valrico, FL on: July 10, 2009
| ||It looks great and painted well to match existing cabinetry. Unfortunately, it is not the easiest to roll up
I am wondering if the door opens up completely or just half way up? Does the tambour door roll up under the top of the cabinet to allow sufficient room to use appliances inside the garage, or do they have to be pulled out onto the cabinet? - Asked about product NA-AG-100VRO-24
| ||We do not recommend using the appliances inside the garage due to the plastic tracks the door is rolled up into. They are plastic and could melt.
| ||100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0)|
|What is the difference between the veneer door and the solid door? You you have picturs of both? - Asked about product NA-AG-100SVAL-30
| ||The difference between the solid wood and veneer door is the following.
The veneer doors have a layer of veneered wood (thin layer of wood) adhered to mdf to provide the thickness. Veneer stains just like solid wood. It provides the look without the expense of solid wood.
The doors are made of solid lumber pieces, no mdf panel. Stains the same as veneer would.
If you is using tambour larger than 36" wide, solid wood would be the best choice.
| ||100% of 4 people found this useful. Was this useful to you? Yes (4) | No (0)|
|Is this unit unfinished, ready to stain or paint? - Asked about product NA-AG-100SVAL-30
| ||These appliance garages are unfinished and ready for paint or stain.
| ||100% of 11 people found this useful. Was this useful to you? Yes (11) | No (0)|
This item(s) is also sometimes listed under the following manufacturer numbers:
AG-100SVC-24, AG-100SVR-18, AG-100SVM-30, AG-100SSM-24, AG-100SSR-18, AG-100SSR-30, AG-100SVR-30, AG-100SVM-18, AG-100SSM-18, AG-100SVM-24, AG-100SVH-18, AG-100SSH-18, AG-100SVH-24, AG-100SSH-24, AG-100SVH-30, AG-100SSH-30, AG-100SVC-18, AG-100SSC-18, AG-100SSC-24, AG-100SVC-30
an Aoife Company LLC Store
Avenue, Stratford, CT 06615
Tel: (203) 374-5425
Fax: (203) 373-0810