The White Painted Tambour Straight Appliance Garage features a modified solid-look painted tambour door, spring tension track system, vinyl laminated end panels and a top rail. Great for stashing your appliances away. Easy to Install.
Poor instructions, some parts do not fit by: David Bennett from: Franklin, TN on: July 13, 2015
The product appears to be of average quality however the instructions appear to be generic for several models. I understand that the height might need to be modified to fit your cabinet height but the dowel for the door should be pre cut to fit. The width of the garage is constant and the roller dowel should come the proper length. The instructions show only one plastic donut when two are in the kit and are required.
More care should be taken to insure that the instructions coincide with the kit and parts that should not need to be cut in the field are supplied at the proper length.
... by: Sue Bos from: Coopersville, Mi on: April 22, 2013
Good Product! Tricky to put together. The plastic square that the roll-door fits in stuck up above the wooden side so I had to cut it off in order for the garage to fit flush with my top cupboard.
The height of the appliance garage is 1" too high from the counter top to the bottom of the upper cabinet. Can the appliance garage be shortened at the bottom?
Thank you. - Asked about product NA-AG-200SW-24
Yes you can trim it from the bottom. Appliance garages are all trimmable to fit your application.
90% of 10 people found this useful. Was this useful to you? Yes (9) | No (1)