 | My cabinets are 17.25" from the bottom of the inside of the cabinet to the granite and 16.25" from the very outside of the cabinet to the granite. How long are the tambour tracks? Will I be able to cut the wood down to 16.25" without affecting the tambour track? - Asked about product NA-A0160MUF1 |
| |  | To use NA-A0160MUF1, you do need a minimum height of 18-18-1/4" high. The width is trimmable, however, the height is not.
|
| | | - Answered on February 23, 2022 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| I would like a 12" top and 23" side panels so I can use it for medical storage on my counter - Asked about product NA-A0160OUF1 |
| | | Unfortunately, Omega National does not make any appliance garages with custom sizing, and these can only be made to the sizes listed on our site.
|
| | | - Answered on October 5, 2021 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| What is the inside height clearance from the open door to countertop? - Asked about product NA-A0160HUF1 |
| | | Per Omega National, the Wood Tambour Kitchen Straight Appliance Garage inside height clearance is 14-1/2" high.
|
| | | - Answered on February 10, 2021 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| What is the difference in color in maple and oak? - Asked about product NA-A0160MUF1 |
| | | Maple and Oak are wood species options, as NA-A0160MUF1 is made of actual wood.
|
| | | - Answered on January 19, 2021 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Can this be painted or stained by my cabinet people? Iām planning my kitchen with black cabinets, but having had this door type appliance garage previously, I really want one again. - Asked about product NA-A0160MUF1 |
| | | Yes, this Omega National Wood Tambour Kitchen Straight Appliance Garage is ready to paint or stain.
|
| | | - Answered on June 9, 2020 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| What color is the maple stained? - Asked about product NA-A0160MUF1 |
| | | The wood that is used to make the garage is maple - it arrives unfinished so the customer has the option to paint or stain the garage to their liking.
|
| | | - Answered on June 25, 2018 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| If I wanted to paint this with a latex based "chalked" paint, which material would be best to purchase? Does the wood matter pre-painting? - Asked about product NA-A0160QUF1 |
| | | The maple is the best material for painting.
|
| | | - Answered on June 12, 2017 |
| | | 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) |
|
| Can the height of this be trimmed to 16 3/4 inches?
That is the height from countertop to cabinet. - Asked about product NA-A0160HUF1 |
| | | Yes this item is trimmable and can be trimmed down to your height requirement.
|
| | | - Answered on June 5, 2017 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| My opening is 27" wide by 17 1/4 high. Is there a garage that will fit this?
- Asked about product NA-A0160QUF1 |
| | | Unfortunately this item requires the Counter to Cabinet height to be 18" to 18-1/4" H. You can view item: https://www.kitchensource.com/cau/na-ag100s.htm?p=NA-AG-100SSAL-18 - This item is trimmable on the width and the height.
|
| | | - Answered on December 14, 2016 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| The dimensions I need are: 32 1/2" wide, 23" high, and 11 1/2" deep. This product is what I want, but of course the dimension are not exact. Can it be configured to fit my cabinet? thanks. - Asked about product NA-A0160OUF1 |
| | | Unfortunately these are not customizable, you can only trim these garages down.
|
| | | - Answered on October 7, 2016 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| We have a cabinet opening 26" wide, 25 1/4 deep, 20 3/4 height, in red oak. Will the 30" be adaptable for this? What is exactly in the kit? thank you - Asked about product NA-A0160OUF1 |
| | | Per the manufacturer, it can be trimmed down to the size you need. If you look at the second image on the page, you will see what the kit consists of. The items included are the Tambour door, the track, end panels, appliance garage rail, and hardware for mounting. You can also view the install instructions for a better idea: https://www.kitchensource.com/cau/pdf/na-appliance-garage-instructions.pdf
|
| | | - Answered on September 14, 2016 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Do you have any suggestions for mounting your under cabinet garage on a quartz count top other than drilling into stone and inserting a receiver of some type ?
Thank you,
Mauro - Asked about product NA-A0160MUF1 |
| | | Omega National suggests using a caulk of some sort or another. Use masking tape to hold it in place until the caulk dries. You could also use some double stick tape.
|
| | | - Answered on June 3, 2015 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| I am looking for a unit like your NA-A0160OUF1, but I am unsure of dimensions. I need vertical height of 17" and width of 33" and 36". I await your response. - Asked about product NA-A0160OUF1 |
| | | The Appliance Garage Dimensions are: 30" W x 11-3/4" D x 18"H
Refitting of the cabinetry will be necessary to attempt this installation.
https://www.kitchensource.com/cau/pdf/na-appliance-garage-instructions.pdf
|
| | | - Answered on September 9, 2014 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Is it possible to purchase this appliance garage in a 36" length? Thanks much - Asked about product NA-A0160OUF1 |
| | | This Tambour Door Kit is not available in the size you require however, separately purchasing the Tambour Track System (NA-ST-2-36) and the Trimmable Red Oak 47-1/2W x 24H Tambour (NA-V-3-RO505) will suit your needs, just the same. For pricing and to place order please, contact 800-667-8721.
|
| | | - Answered on December 1, 2015 |
| | | 100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0) |
|
| What are the dimensions? - Asked about product NA-A0160CUF1 |
| | | The Dimensions on the Wood Tambour Straight Appliance Garage is 30" W x 11-3/4" D x 18" H
|
| | | - Answered on February 27, 2017 |
| | | 67% of 6 people found this useful. Was this useful to you? Yes (4) | No (2) |
|
| Can the height be made smaller as well? - Asked about product NA-A0160OUF1 |
| | | he height can be made smaller however this would require that you cut the item once you receive it to fit your needs.
|
| | | - Answered on November 6, 2013 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Does this product comes in 24inch width? - Asked about product NA-A0160QUF1 |
| | | Here is a link to 24 appliance garage options: https://www.kitchensource.com/cau/na-ag100s.htm
|
| | | - Answered on August 6, 2013 |
| | | 75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1) |
|
| I have a toaster oven that is 16 inches deep. Can it be deeper that 11 3/4 inches deep? - Asked about product NA-A0160MUF1 |
| | | What you can do is purchase the Appliance Garage Components package which supplies the door and the mechanics, but you would have to use your own side walls. This allows you to create any depth you wish. Here is the link to that page:
https://www.kitchensource.com/cau/na-ao100.htm
|
| | | - Answered on December 21, 2016 |
| | | 100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0) |
|
| Can the straight appliance garage kit's width be cut down from 30" to a smaller size? Our space where we need one is 15" H x 28" W x 11" Deep.
Thank you for your assistance.
Sincerely,
Karen Tieken - Asked about product NA-A0160MUF1 |
| | | Yes, it can be cut to a smaller size by using a saw.
|
| | | - Answered on April 17, 2013 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Re. Omega Series Fronts/Components for Straight Unit Appliance Garages
Is the wood finished or unfinished? - Asked about product NA-A0160MUF1 |
| | | All Omega National appliance garages come unfinished. What you are choosing is the species of wood, and you can stain or paint to match your existing cabinetry.
|
| | | - Answered on January 25, 2015 |
| | | 100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0) |
|
1.800.667.8721
Order Status
Kitchen Accessories
Optional Care Products:
