** Cabinetry Not Included
Plate Display Unit
$46.83 - $79.39
No Sales Tax, Except CT
- Pre-assembled plate display rack kit (front & back racks)
- For use in customer supplied cabinet - Cabinet Not Included
- Center 3 dowels can be removed for easy cleaning
- Dowels have a 3/8" diameter
- Spaced 2" apart on center
- Can be trimmed in between dowels to fit cabinets with different widths
- Height cannot be trimmed
- Available in various wood species: Red Oak, Maple, Hickory, Cherry
- Supplied unfinished - sanded and ready to finish
- Weight: 4-5 Lbs.
- Made in the USA
Comes pre-assembled and can be trimmed to fit most cabinets, the Pre-Assembled Plate Display Rack Kit from Omega National is available in Red Oak, Cherry, Hickory and Maple wood species to match any kitchen. The dowels measure 3/8" in diameter and are spaced 2" on center. The center 3 dowels are removable for easy cleaning.
(W = side to side) (D = front to back) (H = top to bottom)
30": 28 1/4" Wx 13-1/16" H.
36": 34 1/4" W x 13-1/16" H
Ships via UPS/FedEx Ground
by: Willam from: Miami, Fl on: August 22, 2016
| ||Great product. Real wood. I had to stain it myself, which surprised me a little. But other than that it's a really good value. I saw a lot of others advertised for much more money.
by: Stephanie L Roscoe from: Waterville, Ma on: July 25, 2016
| ||Took a lititle longer than expected to arrive but got here all in one piece. Haven't put it together yet bit can't wait to see it done.
by: Tami Day from: La Grange, Ke on: March 8, 2016
| ||It happened to fit the width of my shelf. The result is very good.
|Exactlly what I wanted
by: Larry Rocks from: Birmingham, Al on: February 4, 2016
| ||When my wife and I decided on a plate rack cabinet in the kitchen, the Do It Yourself project seemed a little overwhelming to fit into "spare" time. So I decided to jump start the project with a ready made dowel rack by Kitchen Source. A great decision! Great quality, great service, and at a reasonable price. Highly satisfied with the product. With basic carpentry skills, it is easy to build a box around the rack and add shelves above.
And the service was quick!
by: TIM MULVIHILL from: Plano, TX on: October 13, 2014
| ||item was as advertised,easy to install. looks and functions well.
by: Linda McKenzie from: -, WV on: July 9, 2013
| ||The plate rack was very easy to install. It was about 3 inches to long (which I knew), so after some minor adjustment we stained it and put polyurethane on it. Had LOTS of compliments! I LOVE it!
by: Elena from: Mt. Plesant, SC on: October 8, 2012
| ||Cannot give 5 stars because it did not come with any instructions or tips for installation.
|looks good, good quality
by: Wanda from: Clifton Park, Ne on: September 27, 2012
| ||Cannot give 5 stars because it did not come with any instructions or tips for installation. Since it is my first time putting one in it took a trip to the home store to view a plate rack already installed to figure out how to best place it in the cabinet. Looks very good once stained and installed. Added some trim and it looks like it was built into the cabinet. Overall very pleased.
|Will I be able to display my 12" plates in these units? - Asked about product NA-NPD-30-RO
| ||Before the dowels go into the rails, you have 12.5625" space, so you should be able to slide the 12" plates in there.
| ||100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)|
|What is the dimension between the dowels (center to center) on a plate display rack? - Asked about product NA-NPD-30-CH
| ||Dowels are spaced 2” center.
| ||86% of 7 people found this useful. Was this useful to you? Yes (6) | No (1)|
This item(s) is also sometimes listed under the following manufacturer numbers:
NPD-30-CH, NPD-30-HI, NPD-30-MA, NPD-30-RO, NPD-36-CH, NPD-36-HI, NPD-36-MA, NPD-36-RO