5 oz. Tube - Available in a 3 or 12 Pack
*Combination of natural un-bleached beeswax & mineral oil
*Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack
*Mixture of white mineral oil & beeswax
*Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case
*Makes repairs and fabrication a foolproof operation
*Can be used to touch-up tables with Varnique or Tuff-Var finish
*Can also be used on oil finish tops to convert them to varnique tops
The 1-1/2" thick John Boos Blended Cherry Island Tops feature an edge-grain construction, the island tops have full-length rails for a consistent look. The random color finger-jointing construction adds a harmonious feel to your kitchen. The blended tops have butt joints and color variations and the rails do not run the full length of the countertop. The island tops are available in depths of 30”, 32”, 36”, 38” and 42”, and in 36", 42", 48", 60", 72", 97", 121" and 145" widths to fit any kitchen island. Available in oil or in optional Varnique finish.
A great product! At a good price! Will order from this company again. by: Cindy B. from: Galax, VA on: September 16, 2015
gorgeous! by: jan from: Lagunitas, ca on: June 18, 2015
I purchased the cherry butcher block and am thrilled at how beautiful it is and how much it changes a drab kitchen into a gorgeous, elegant room. I used it to replace a formica counter top island. It was very easy to round the corners and soften the edge and simple to install. It took a pint of mineral oil at first but it is perfect in everyway.
Very nice wood by: Mark from: Brunswick, ME on: March 5, 2014
Exactly as advertised. Gorgeous wood that appears well-assembled.
Only installed for a week at this point, so can't yet speak to the long-term stability.
I was a bit surprised how easily it stained with food, but salt and lemon juice got out the worst, and now it's just part of the improving patina.
Gorgeous by: Jim from: Enola, PA on: February 7, 2013
This product was exactly what we ordered. The quality is exceptional. We are very pleased.
Simply beautiful by: ML from: Seattle, WA on: June 8, 2012
My new kitchen island in blended cherry has transformed our kitchen. We replaced our granite with this much warmer and more beautiful wood counter. I love it!
Am I able to cut holes in butcher, for a sink? Or is that something you can do? - Asked about product JB-CHYKCTBL9742-O
You or your installer can cut the hole for the sink as John Boos does not cut sink holes. Please keep in mind that if you are installing a sink, you should be using a Varnique finish to protect it from moisture. This however should not be cut on as it would scratch / mark the top. With a varnique finish you would still need a cutting board.
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)