5 oz. Tube - Available in a 3 or 12 Pack
*Combination of natural un-bleached beeswax & mineral oil
*Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack
*Mixture of white mineral oil & beeswax
*Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case
*Makes repairs and fabrication a foolproof operation
*Can be used to touch-up tables with Varnique or Tuff-Var finish
*Can also be used on oil finish tops to convert them to varnique tops
Finish off your kitchen island with this 1-1/2" Thick Island Top from John Boos. The countertop is made of American Cherry and it comes in 27", 30", 32", 36", 38", 42" and 48" depths and in widths from 36" to 145." The full-length rails are selected, cut and matched to create a uniform appearance. The island countertops feature a standard penetrating oil finish for food preparation. An optional Varnique finish is also available for furniture applications.
Finishing Touch by: Sharon Bannister from: Yucaipa , CA on: April 9, 2015
The cherry butcher block counter top provides the finishing touch to my kitchen refresh. I wanted my 24x36" island to look like a seperate piece of furniture so I painted it a contrasting color and accented it w ceramic knobs but it wasn't until the hardwood top was installed that I achieved my goal. Now I just need to get over the feeling that it's too beautiful to actually use.
Exactly what we expected. by: Henderson from: Middleton, WI on: October 19, 2009
Are the exact dimensions of a 48" Wide by 36" Length Island butcher block in American Cherry going to be 48"x36." We'd like to built the island and need to know Exact measurements. Thanks.
Also, are all sides sanded and ready for install, including the edges??
Thanks - Asked about product JB-CHYKCT4836-O
Typically, the is a variance of 1/8” in production however, we can request “exact” measurements when the order is placed.
Yes, the edges are ready to install- smoothed, sanded and finished.
100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)