5 oz. Tube - Available in a 3 or 12 Pack
*Combination of natural un-bleached beeswax & mineral oil
*Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack
*Mixture of white mineral oil & beeswax
*Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case
*Makes repairs and fabrication a foolproof operation
*Can be used to touch-up tables with Varnique or Tuff-Var finish
*Can also be used on oil finish tops to convert them to varnique tops
This John Boos Maple End Grain Butcher Block Island Top is the perfect addition to your kitchen island. The island top is made of hard rock maple with an end-grain construction and has 1/4" radius top edges and corners. Choose a 25", 27", 32" or 38" depth and a 24", 30", 36" 48" or 60" width to fit your kitchen. The island tops have a standard penetrating Oil finish designed for slicing, chopping, dicing and any other food preparation.
Perfec by: Graham K. Miller from: Bay City, MI on: April 24, 2013
My Boos butcher block counter top is perfect. At 27"x60"x4" thick, it weighed 284 lbs. It arrived well packed in plywood and on a pallet. It installed easily on my new island cabinets. It is a wonderful addition to my ktchen.
My only comment is that it is tll. It is 2" taller than my other counters, but that is because the top is thick. I like this because I am a little taller, but if someone were short or worked a lot directly over their food (kneading dough for example) you might want to custom order the cabinets or base a bit short.
received just as described. by: clayton from: midland, tx on: January 5, 2012
RE: Boos butcher blocks JB-BBIT....
Regardless of size, are any of them reversible and also, will a push pin penetrate the wood? We cut fabric on our cutting block and we use push pins to hold the material down.
Don - Asked about product JB-BBIT3032
While, these boards aren’t manufactured to be Reversible, we are able to custom make it to be Reversible with an up charge. Keep in mind that the Oil finish may adhere to the fabric and Varnique Finish should not be heated. It may be a little difficult to get a push pin in the block.
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)