Ordering Instructions for Jewelry Inserts:

1. Measure your drawer's inside width.
2. Measure your drawer's inside depth.

Subtract from your measurements obstructions such as handle screw heads and corner brackets. We subtract 1/16" installation clearance from your width and depth.
 
                                      

Jewelry top tray organizer has removable slotted dividers and is 1 1/4" high. Jewelry Lower Divider is 1 1/2" high and does not include a floor.

Drawer height must be at least 2 if ordering both top tray and lower divider.

Your top tray depth will be approximately half of your drawer depth, in order to allow the top tray to slide front to back over the lower divider.



                                Jewelry Organizer Insert Configurations

close