$9.30 - $15.60
No Sales Tax, Except CT
- Cutlery tray
- Can be trimmed to fit drawer
- Made of plastic
- White gloss finish
- Material thickness: 2 mm
- For drawers inside widths from 7-1/4" to 21-3/4"
- For drawer inside depths from 18" to 21-1/4"
- Height: 2-1/4"
Designed to fit drawer inside depths from 457mm (18") to 540mm (21-3/4") and drawer inside widths from 184mm (7-1/4") to 552mm (21-3/4"), these cutlery tray inserts can be trimmed to fit your drawer. The cutlery tray inserts are made of sturdy White gloss plastic and come in seven sizes.
(W = side to side) (D = front to back) (H = top to bottom)
Depth: 18" to 21-1/4"
Height: 2-1/4" All trays are 2-1/4" high
Ships via UPS/FedEx Ground
|Just what I needed
by: Tony from: Upstate, Ne on: October 12, 2015
| ||Great replacement for our old one. There are no directions however but pretty easy to figure it out - measure and cut. I used tin snips and then sanded the edges to make them smooth.
|Great...told others about this....
by: Janet Czichotzki from: Breckenridge, Mn on: October 7, 2015
| ||My daughter will be ordering one after she saw mine...tray...hopefully I remember your web site...
by: Thomas Gialamas from: Tinley Park, IL on: December 5, 2014
| ||The two inserts that I purchased worked out fine.
I removed the old ones measured the old ones and trimmed the new ones to match .
Installed them into the drawers and they fit like a glove.
I will definitely purchase some others for our kitchen.
|Great product everything as I expected
by: Donna from: Greenville, WI on: April 26, 2013
|Does the Job
by: Marsha A Lynn from: Orchard Lake, MI on: December 6, 2012
| ||We had to have this drawer insert professionally cut to size, but it fits fine. I needed it to replace an insert that came with my cabinets 22 years ago. Your company was the only place I could find that anything that would give me a custom fit.
by: Renee from: Corral de Tierra, CA on: October 22, 2010
| ||eh....it's just OK looking. They don't tell you how to "trim" it....and after numerous at different ways from using power saw to exacto knife....finally got reasonable results with a large "snips" or cutters.
| Plastic Cutlery Drawer-Fit like a glove
by: Jay from: Overland Park, KS on: July 11, 2009
| ||Easy to cut down to size, just make sure it's big enough in all 3 dimensions. Also check that what you're ordering online is what you mean to order
by: Jay from: Ove, - on: July 11, 2009
|I have two drawers that measure 28 5/8 w x 18 5/8 D and hold larger items, like serving spoons or ladles. Would buying two inserts work, like the HA-556.61.770 and 710 ?
- Asked about product HA-556.61.770
| ||You can purchase two inserts and cut them down to size to fit one larger space, you would want to leave a lips to over the other unit . Once these are cut to size they are non returnable so you want to make sure you double check your measurements prior to cutting.
| ||50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1)|
|How does it attach to the drawer? - Asked about product HA-556.61.750
| ||The tray sits in the drawer, it does not attach to anything.
| ||75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1)|
|I am replacing an organizer of the same size, but the side compartments are larger than those in the center. Your diagram shows them all the same size. Do you have the measurements? - Asked about product HA-556.61.730
| ||All compartments for a given cutlery tray insert are of equal width.
| ||100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0)|
This item(s) is also sometimes listed under the following manufacturer numbers:
556.61.720, 556.61.730, 556.61.710, 556.61.740, 556.61.750, 556.61.760, 556.61.770