Bed in Down Position
Folding Down
Fitting w/ Piston
Fitting
Info
Dimensions
Our Price: $359.07 $512.96 30% Off No Sales Tax, Except CT
Product Reviews
- Hafele Foldaway Bed Fittings Hardware Kit - Lengthwise Mounting
- Furniture supplied by the customer
- Allows for the construction of foldaway beds according to your own plan
- The cabinet and bedbox constructions require a wood thickness of 20mm
- A minimum 40x40 square beam is needed on four sides as slatted frame support
- It is essential for foldaway beds to be secured against tipping, according to EN 1129 (check the floor for suitability)
- The angular feet with mounting plate are screw-mounted to the foot side of the bed frame and to the inside of the front panel
- Instead of legs, large handles can be mounted which serve as supports when the bed is in the down position
- Another possibility is an overhead shelf
- Note: Successful and safe installation of fitting hardware set and construction of bed requires a professional skill level.
- Supplied With:
Foldaway fittings with pivot bearing and positioning bolt for gas pistons
2 Safety Stops
Mounting material
Detailed Mounting Instructions
Required Items:- Gas Pistons (Sold Separately) Click here
- Note: Order gas pistons separately depending on bed weight - 2 pcs. Required per bed
- Pre-stressed with tightening strap
- Tightening strap needed to install or remove piston from fitting set
| Bed Weight |
Pushing Force |
Item No. |
| 110 lbs. |
900 N |
271.99.220 |
| 132 lbs. |
1100 N |
271.99.266 |
| 154 lbs. |
1300 N |
271.99.300 |
| 176 lbs. |
1500 N |
271.99.346 |
| 198 lbs. |
1700 N |
271.99.382 |
| 220 lbs. |
1900 N |
271.99.410 |
- Retaining Straps for bedding (Sold Separately) Click here
- With contact closing
- Needed to install or remove piston from fitting set
| For Mattress Width |
Item No. |
| up to 35-7/16" |
271.87.920 |
| up to 47-1/4" |
271.87.921 |
| up to 55-1/8" |
271.87.922 |
- Angular Feet (Sold Separately) Click here
- To support the opening
- When opening the bed, the angular feet must be extracted, turned by 90º and retracted to the stop
- Steel, powder-coated
For selecting the gas-loaded spring, the bed weight is needed.
Bed box and slatted mattress frame + Mattress and bedding |
| = Bed weight |
| Mattress width + 2x bed frame thickness + 125mm |
| = internal cabinet height |
| Mattress length + 2x bed frame thickness + 54mm |
| = internal cabinet width |
| Gap on four sides between cabinet and front panel |
| = minimum 4mm |
This Hafele Foldaway Bed Fittings Hardware Kit with Lengthwise Mounting allows for the construction of foldaway beds according to your own plan. The cabinet and bedbox constructions require a wood thickness of 20mm and a minimum 40x40 square beam is needed on four sides as slatted frame support.
(W = side to side) (D = front to back) (H = top to bottom)
Max Width: 59"
Max Height: 90"
Min. Depth: 17"
Ships via UPS/FedEx Ground
|
1.800.667.8721
Order Status
Kitchen Accessories
