Workcenter with Winerack
Workcenter without Winerack
$549.59 - $565.58
No Sales Tax, Except CTAdditional savings given at checkout!
- Made of Solid North American Hardwood
- Oil finish
- Drawer handle doubles as a towel bar
- Chrome towel bars on left and right side
- 1-3/4" Thick butcher block top with 10" drop leaf
- Large capacity deep Drawer with full extension glides
- Heavy-duty wheels (2 locking)
- Available with or without wine rack
- Wine rack holds up to six bottles
- Slatted shelf offers extra storage
- Ships via UPS (2 boxes)
- Assembly required
- Weight: 99-106 lbs.
- Made in the USA
- This is an Eco-Friendly product
- Block Care Instructions
- How to Maintain your Butcher Block
Perfect for smaller kitchens, this Baby Grand Workcenter from Catskill has plenty of storage. The kitchen cart is made of solid North American hardwood and features a 1-3/4" thick butcher block top, a large capacity drawer that's 9" deep, a slatted shelf, heavy-duty wheels and three chrome towel bars. The 10" drop leaf has strong supports for extra stability. The kitchen cart measures 29" W x 29" D x 35" H with the drop leaf up and 29" W x 19-1/2" D x 35" H with the drop leaf down. The cart comes with or without a six-bottle wine rack . Assembly required. Ships via UPS.
Overall Dimensions: 29" W x 29" D x 35" H
Table Top with drop leaf up: 29" W x 29" D x 1 3/4" Thick
Table Top with drop leaf down: 29" W x 19" D x 1 3/4" Thick
Shelf Dimensions: 25 3/4" W x 17 1/8" D x 11 3/8" H (Clearance)
Wine Rack Clearance on CA-KI11349: 6" (fits 6 standard wine bottles)
Interior Drawer Dimensions: 19 5/8" W x 17" D x 8" H
Ships via UPS/FedEx Ground
|Great item, adds to kitchen utility and looks
by: Don from: Baton Rouge, La on: February 14, 2014
| ||Very easy to assemble. It took about 4 hours with only a misstep or two. The instructions for assembly were fairly well done and easy to follow. The table ended up very solid and tight.
by: L.Davis from: Midland Park, NJ on: February 6, 2014
| ||The Catskill Craftsman Baby Grand Workcenter is beautifully made. We are very happy and it looks so nice in our kitchen. It took about 4 hours to build. There was some confusion with the type of screws to use in certain areas and we ended up using the wrong ones and had to buy a few more to finish up, but it really presented no problems. Would definately recommend Catskill Craftsman!
|Great piece of furniture
by: mary pelikan from: wheat ridge, co on: November 1, 2013
| ||this is a beautiful kitchen piece. the cutting board is a bit rough so i am having to spend a little time sanding it. I also glued the drawer to reinforce it. I have already received many comments on the unit.
by: Carol Rees from: Fort Worth, TX on: December 23, 2010
| ||This butcher block table was exactly what I was looking for (even the color matched my Kitchen cabinets)! Love the deep drawer ... and the drop leave for extra length when needed. Took us a few days to put together.... They should send some extra nuts/bolts ... in case you are missing some. (our cats managed to knock some off the table and we went crazy finding them). Excellent value ....perfect... perfect.... perfect...
|Pretty and OK for a do-it-yourselfer.
by: Needed an island from: Kalamazoo, MI on: September 7, 2010
| ||The design is nice and the wood is good quality but the surface finish is a little rough. We need to sand the edges because they are snagging lint from dish towels.
Construction: I do not like furniture that is assembled with 'compression fittings'. I expect these on lower end -particle board furniture, but not on a $700 piece of solid wood furniture. Because we could not get tight fit on any of the the pieces, we disassembled the unit, applied wood glue to all the joints, then retightened the compression fittings. We also added a few wood screws in strategic locations. With these added measure, we seem to have a solid and stable piece.
When the unit arrived the 'kit' was missing some screws and the angle brackets needed to attach the butcher block top. The company, however, quickly sent the missing parts when I called.
|What specific type of North American Hardwood is this unit made of? - Asked about product CA-KI11380
| ||The Baby Grand Workcenter is made of Birch
| ||100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0)|
|Hello, can this product be used without the rolling casters? If so, do you know how tall the unit would be?
Kelley - Asked about product CA-KI11349
| ||Yes it can be, and the casters are 2.5 inches.
| ||100% of 12 people found this useful. Was this useful to you? Yes (12) | No (0)|
an Aoife Company LLC Store
Avenue, Stratford, CT 06615
Tel: (203) 374-5425
Fax: (203) 373-0810