John Boos - Cucina Classico Kitchen Island with Cherry Top
$699 - $749
No Sales Tax, Except CT
- Edge grain blended Cherry top with varnique finish
- Food service grade stainless steel base and center bracing
- Optional casters available - set of 4 (locking)
- Available in a countertop height of 36" or a bar height of 40"
- The center bracing allows seating from both sides of the table
- Shipped via Truck (to curbside - extra charge for inside delivery and/or lift gate service)
- This is an Eco-Friendly product
- Also available with a walnut top
- Block Care Instructions
- How to Maintain your Butcher Block
- Made In America
The Cucina Classico Kitchen Island by John Boos is the perfect addition to any kitchen. The kitchen island has a Cherry butcher block top with an edge grain construction and a Varnique finish. The base is made of food-service grade stainless steel and is designed with center bracing that allows seating from both sides of the table. This kitchen island is available in a countertop height of 36" or a bar height of 40". Add optional casters to make this table easier to move. Ships via truck.
48" W x 24" D 36" H
48" W x 24" D 40" H
48" W x 30" D 36" H
48" W x 30" D 40" H
|Attractive and sturdy!
by: Amy Parker from: Sacramento, , CA on: February 18, 2013
| ||It arrived in one large box, was easy to assemble,. and appears to be very well-made, attractive, and super sturdy. I love it!
|beautiful table but late
by: Deborah Becker from: West New York, NJ on: January 21, 2013
| ||The table is great, wood is beautiful. I (a woman) put the table together myself but the casters are a different story and John Boos should do better. The casters come with instructions that say installation takes considerable strength and requires a rubber mallet (or hammer) to force the wheels onto the legs. I used a different approach instead of forcing in the casters: tighten the nut on the casters (does take some strength) until the rubber piece is wider than the leg - leave the caster in the leg opening and then slightly loosen the nut until the caster slides in, and then tighten the nut again. You'll need a 3/4 inch wrench for the casters. Not easy but much easier than what the instructions say.
by: WEF from: University Heights, Oh on: August 5, 2010
| ||The table is beautiful and exactly how it was represented when purchased on line. Packaged very well and no damage. Two items to put in the "do better category": a)I wish it had a "Boos" label burned into it, and b) it took longer to ship than expected.
an Aoife Company LLC Store
Avenue, Stratford, CT 06615
Tel: (203) 374-5425
Fax: (203) 373-0810