Varnique Finish: Varnique is available and is a semi-gloss finish formulated to repel most household solvents, such as detergents, alcohol etc. Varnique finish tables are not appropriate for cutting on it. (*voids NSF certification)
5 oz. Tube - Available in a 3 or 12 Pack
*Combination of natural un-bleached beeswax & mineral oil
*Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack
*Mixture of white mineral oil & beeswax
*Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case
*Makes repairs and fabrication a foolproof operation
*Can be used to touch-up tables with Varnique or Tuff-Var finish
*Can also be used on oil finish tops to convert them to varnique tops
Designed for bakeries, delicatessens, restaurants and other food industries, these John Boos Metal Work Tables feature a 2-1/4" thick maple top and a stainless steel base. The tables are available in widths that range from 36" to 120" and depths of 24", 30" and 36". Optional drawers, stainless steel shelves, galvanized shelves, 5" heavy-duty casters and key locks are also available separately to customize your work table. An optional Varnique finish is also available. The work tables ship via truck.
What is the weight of this table?
- Asked about product JB-TNB04A-V
The weight of this table is 158 lbs.
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)
What is the varnique finish? Does it require special care? Does it make the surface look different? Shiny?
What is the finish on the non-varnique option.
The optional casters are 5 inch. I found a 2 inch lockin John Boos caster online. Is it compatible with this piece? % inches would raise the table too far above counter height.
Scott - Asked about product JB-TNB10-V
Yes, Varnique finish is a semi-gloss finish and is virtually maintenance free. However, cuts into the finish should be resealed immediately to prevent the exposed wood from absorbing moisture.
The other finish available is Oil. This is a butcher block top finish and is the only finish we recommend, as a cutting surface.