Rev-A-Shelf at Cabinet Accessories Unlimited

6621 Series - Full Round
6221 Series - "D" Shape
6421 Series - Kidney
Wood Classics - single "D" - Shape

1. Locate the bottom positioner assembly on the cabinet floor so that the shelf will have at least 3/8" side clearance all around, and the position and location of the positioner base will determine the positioning of the shelf on D-Shelf and kidney trays.

2. Pilot drill (1/8" diameter) holes and fasten the positioner assembly with four (4) 3/4" x 8 oval head wood screws (F1208-13-12).

3. Insert the shaft into the positioner assembly and tighten the locking screw. Place the shelf into the shaft.