::Swing Out Pantry Installation - Swing Out Unitclose window   print page

 
:: Tools needed for installation::: Contents:
  • Phillips Screwdriver
  • 3/4" Wood Spacer
  • (1) Pantry Unit with Piano Hinge
  • (1) Magnetic Catch and Strike Plate
  • (4) Wire Fence Pieces for Top Shelf (If Needed)
  • (8) Wood Plugs for Top Shelf (If Wire Fence is Not Used)
  • (2) 1/4" spacers
  • (1) Screw Pack
 

 
:: Step 1:
Set Swing Out unit in cabinet with 3/4" spacer underneath for floor clearance
 
:: Step 2:
Swing piano hinge around to inside of cabinet where unit is to be installed
 
:: Step 3:
Place the 1/4" spacers between unit and center divider of cabinet. One at top and bottom of unit
 
:: Step 4:
Screw piano hinge into cabinet using screws that came packaged with hinge & and install magnetic catch and strike plate using screws provided then remove and discard spacers