::Swing Out Pantry Installation - Door Unitclose window   print page

 
:: Step 1:
Loosen Adjustable Mounting Brackets (AMB's) adjust until unit is in center of the door (This is to ensure door swing clearance, away from non-hinge side of door)
Loosen Adjustable Mounting Brackets (AMB's)
:: Step 2:
Tighten AMB's after desired placement is achieved
:: Step 3:
Make sure bottom of unit clears cabinet opening (If swing out unit is installed, door unit should be installed at same height)
 
   
:: Step 4:  
Screw unit into door frame using 4mm X 16mm screws provided for AMB's