Hammered Steel Finish
Stainless Steel Finish
$134.95 - $395.95
No Sales Tax, Except CT
- Available in 36",48", 60" and 72" (Custom Order)
- Available in Hammered Steel, Chrome, Copper and Stainless Steel finishes
- All models are 20" in height
- Comes with ceiling screws
- Includes Angled Hooks
- Ships via UPS
- Custom Order: EN-PR18-72HS: Hammered Steel, 72" Width: Please Call to Order @ 1-800-667-8721
- Copper & Chrome Finishes Only - Ships in 3-6 weeks
- Avoid additional charges by adding extra hooks and chain with your pot rack
- Extra Chain and/or Hooks
- Made-to-Order Policy
Available in Hammered Steel and Copper, these sleek PR18 Series Ceiling Bar Potracks by Enclume feature fixed, offset hangers. They are the ultimate in design simplicity and are perfect for small spaces. Ships via UPS.
Available in the following lengths:
36" L (16" centers, 6 angled hooks)
48" L (24" centers, 12 angled hooks)
60" or 72" L (32" centers, 18 angled hooks)
72" L: Custom Order Call 1-800-667-8721
Ships via UPS/FedEx Ground
|If you don't own an Enclume.....you're CRAZY!
by: Linda Phillips from: Villanova, PA on: June 10, 2014
| ||Don't bother with any other pot rack. Not for ANY reason. The design is so much more than looks. Our copper finish is gorgeous and the main reason we chose Enclume, and the installation was simple and effective.
by: anonymous from: -, - on: May 6, 2014
|Perfect for my pans!
by: Mgodfrey from: Parker, CO on: January 24, 2014
| ||I love this pot holder!! Its not big and it fits nicely in my window. You could put it against a wall or over a island because its not big like the oval or square one so it doesn't make your kitchen look smaller. I have 12 pans with their lids hooked on it. It was very easy to install.
by: Joyce Castleberry from: New York, NY on: December 24, 2013
| ||Substantial with a big plus because the details show great care in manufacturing and intelligent use of material. All good!
|very heavy duty and looks better than pictures
by: michael mcferon from: Elbert, CO on: September 11, 2013
by: Mark from: -, - on: March 21, 2013
| ||The rack is very nice. However, the hardware provided to attach to the ceiling was less than desirable. I ended up going to the hardware store and purchased a couple of large washers to give it a more polished look at the ceiling.
by: L Plummer from: Westborough, MA on: February 18, 2011
| ||Have always had a pot rack but when we moved to a condo we felt the space was to small to accomodate one. We were so pleased when we found the Enclume
Hammered Steel Ceiling Bar Pot Rack 36" Installation instruction were easy, holds 7 pans and it looks Just Perfect. Thanks
|Built like a tank and looks great
by: Chad from: Santa Clarita, CA on: January 4, 2011
| ||Very satisfied with the pot rack. The included install kit gave me several mounting options (even included some interesting/stout drywall anchors in case I wanted to mount it directly to the gypsum board. Overall it looks great, is built like a tank (the 48" weighs in at around 25 pounds I'm guessing) and I'm sure that it'll be a lasting feature of our kitchen. Another example of the old truism "you get what you pay for."
|Great Product. Needs a few minor tweeks
by: Larry from: Citrus Heights, CA on: January 4, 2010
| ||Great wall rack. I purchased the single bar and it is great for a limited space above the sink. Both wood hooks and machine hooks were included for installation into wood studs or into the ceiling. The hooks did not look alike and became a problem because one side reached a stud but the other side did not. I wish both types of hooks looked alike so they would match. I ended up making a wood plate so that both matching wood screws could be used.
|What is the distance between the ceiling and the lowest part of the hook? - Asked about product EN-PR18-48CH
| ||The Height is 20". The measurements is from the ceiling to the bottom of the pot hook and the Ceiling Screw Hooks are part of the measurement.
| ||67% of 3 people found this useful. Was this useful to you? Yes (2) | No (1)|
|I am going to hang this from a sloped ceiking. Would this work with 2 small extension hook and chain, instead fo the offset hooks? Just not sure if the extension hooks would fit in the mounting holes.
Thanks - Asked about product EN-PR18-60HS
| ||The Extension hooks and chain will fit, but the Extension hooks are square stock and will not match the offset hooks which are cylinder in shape.
| ||0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)|
|How many hooks and of what shape and color does the bar rack ship with. - Asked about product EN-PR18-48HS
| ||The 48” pot rack comes with (12) EN-PHA Angled Pot Hooks that are 4.5 inches H and the hook end is at a right angle. The hooks come in the pot rack finish selected so, in this case, Hammered Steel. To get a better look at EN-PHA Pot Hook, see our Enclume Hooks & Chains Page: http://www.kitchensource.com/pot-racks/encftph.htm
| ||50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1)|
This item(s) is also sometimes listed under the following manufacturer numbers:
PR18-36SS, PR18-48SS, PR18-60SS, PR18-36CH, PR18-36CP, PR18-36HS, PR18-48CH, PR18-48CP, PR18-48HS, PR18-60HS
an Aoife Company LLC Store
Avenue, Stratford, CT 06615
Tel: (203) 374-5425
Fax: (203) 373-0810