Let the A Air-Pro Power Range hood Unit Insert bring your kitchen alive. The 06WP ventilator can mount flush to the bottom of a cabinet or mount into a custom made hood. The attractive stainless steel gives the underside a refined finish. An optional 30'' to 60'' stainless steel T-shaped or Rectangular liner is also available.
(W = side to side) (D = front to back) (H = top to bottom)
Housing: 25" W x 15-3/4" D x 10" H
Overall: 26-5/8" W x 16-5/8" D x 10-1/2" H * Bottom of hood should be 24"-30" above cooktop * Duct Size is 8" round ducting - not included
We just remodeled our kitchen and want to know if this product needs to be vented outside ? - Asked about product FU-06WP
This power pack can be vented outside, or you can purchase a re-circulation kit if you did not wish to do so in the Accessories section - Model # FU-DK-LARGE
- Answered on February 8, 2019
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)
I have this vent but the replacement filter DOES NOT look like mine. The filter I have uses a very small screw to keep filter attached to vent where this one seems to have a clip or some type of grey clamp holding it in the vent. can you help???? - Asked about product FU-06WP
Per AirPro they have upgraded the filters to have the finger latch release, which makes it much easier to remove and replace filters. However they do have the older models available to ship if needed, please call us at 1.800.667.8721 to order it. They suggested you try to upgrading to the slim baffle filters which a mesh backing to catch more grease and you will never have to replace the filter again; seen here - https://www.kitchensource.com/range-hoods/fu-5080-f.htm?p=FU-5080-V
- Answered on November 23, 2016
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)
Can this model also be vented with an elbow--i.e. vertical and horizontal vent? - Asked about product FU-06WP
For item FU-06WP there is only an option for vertical ducting.
- Answered on February 2, 2016
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)
Is this range hood vented or non vented and recirculating air? - Asked about product FU-06WP
This range hood is a vented range hood that requires 8’’ round ducting (not included).
- Answered on October 1, 2014
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)
Reference:
This item(s) is also sometimes listed under the following manufacturer numbers:
1.800.667.8721
Order Status
Kitchen Accessories
Additional Information:
Made in the USA
