Step to step instructions to install
the Monogram ZV750 wall mounted hood for recirculating operation
- One of the following accessory kit is required for non-vented
wall mounted installations of model ZV750
Choose the correct kit according to ceiling heights:
ZXR758 - For 8 to 9 ft. ceiling height
ZXR7510 - for 9 to 10 ft. ceiling heights | - Order the required accessory at the same time as the vent
hood and have on site before installation
- Each kit includes decorative duct cover, air deflector and
charcoal filters
|
|
PRODUCT DIMENSIONS The vent hood must be installed 24" min. and
30" max. above the cooking surface. 25-1/2" is recommended
for best performance and to insure that the duct cover meets the
ceiling. The cooking surface should be at least 36" above
the floor. Installation will be easier if the vent hood is installed
before the cooktop and countertop is installed. | 
*ZXR758
26-1/4" for 8 ft. Ceiling
38-1/4" for 9 ft. Ceiling | | |
ZRX7510
34-1/4" to 50-1/4" for
9 ft. to 10 ft. Ceiling |
* The distance between the cooking surface and
the bottom of the hood must be at least 24" and up to 30".
The 25-1/2" recommended installation height, above the
standard 36" countertops, will insure duct cover fit to
the ceiling.
|
1.800.667.8721 
Order Status 
View Cart 
