Scroll To Top
No Sales Tax, Except CT Orders Free Shipping on all Orders over $99 (Contiguous USA Only) Easy Returns
Free Shipping Over $99
Call Us at 1.800.667.87211.800.667.8721
space
Scroll To Top

S&P Duct Fan Roof Cap Vent for Flat or Pitched Roof

$57.75 - $97.80
No Sales Tax, Except CT
Shipping:
 Free S/H on S and P orders over $99!
Model:
Choose a product from the options above
Qty?

Product Reviews

4.1 10

Shop for similar items:

Features:

  • Roof Cap Vent
  • For 4",6",8" and 10" applications
  • Designed for circular duct
  • Made from galvanized steel
  • Made for flat roofs
  • Also can be used for a pitched room - up to a 6/12 (45Ί) pitch
  • Damper flap closure
  • No Bird screen
  • Ships via UPS/FedEx Ground
  • Click to view S&P kitchen fans
  • Click to view S&P bathroom fans


Description:

These roof vent caps by S&P are made for 4",6",8" and 10" ducting and can be mounted on a flat or pitched roof. These roof caps are made from galvanized steel and have a damper flap closure to allow air to be discharged efficiently. These roof caps ship via UPS.

Ship Method:

    Ships via UPS/FedEx Ground


Matching Items:
Product Reviews:
Review Star RatingsGood Design but Poorly Constructed
by: jack     from: Miami, Fl      on: October 26, 2017
 If you look closely at the picture you can see that the gooseneck and the flashing are two separate pieces held together with very flimsy spot welds, of which two had come apart. In other words, no matter how many nails/screws you put in the flashing one good wind and the gooseneck could pull off the flashing and leave a hole in your roof. It's unbelievable to me that they would build this thing like that. Also, for the sake of information, the front edge apparently is intentionally designed with a 1/4" gap to act as a weep hole for any water to drain out if it were to get past the flap. This is not intended to be used on a flat roof IMO.


Review Star Ratingsexcellent fit
by: David Nelson   Verified Buyer      from: Vineland, NJ      on: October 10, 2014
 worked as designed !!


Review Star RatingsGreat Product
by: Chris Morgan   Verified Buyer      from: Springfield, Pa      on: July 12, 2013
 This is a great product! We had to add a screen for animals to not enter but that was no big deal


Review Star RatingsVery Good Quality
by: LDR Building   Verified Buyer      from: East Lyme, CT      on: September 11, 2012
 Good Product, Quick Service, Great Company to work with


Review Star Ratingswell made product
by: Harold   Verified Buyer      from: Nakina, NC      on: September 23, 2010
 need to add bird screen to this unit to make it better...


Review Star RatingsIt does its job
by: C   Verified Buyer      from: Oyster Bay, NY      on: September 23, 2010
 I wish that the weather flap, inside the cap fit the opening just a bit more, as I feel when the cold weather comes, it will have a down-draft. It also doesn't have any weather stripping around the flap. We added it. It also wasn't the least expensive one. We ordered it because it would arrive to us the fastest, w/o extra delivery and shipping charges.


Review Star Ratings...
by: Steve   Verified Buyer      from: Sebastopol, C      on: September 23, 2009
 


Review Star Ratings...
by: James   Verified Buyer      from: -, -      on: July 10, 2009
 great item easy to install


Review Star RatingsGood Product
by: Daniel Leonard   Verified Buyer      from: Kernersville, NC      on: June 25, 2009
 well constructed, damper unobstructed, good value for money


Review Star RatingsGood product with a caveat
by: Randy S   Verified Buyer      from: Los Angeles, CA      on: May 26, 2009
 Product is as advertised. Purchased and installed 4. I added a bird screen with 1/4" metal mesh over the outlet which is the only improvement I felt it needed.


Your questions that we answered:
Ask a questionWhat gauge is this ? I want to use this for a dryer duct. Is that appropriate ? Please confirm there is a damper Can i get one without a screen ? How soon can you get it to Oakland ca ? Thanks, Lee   - Asked about product SL-RC-4
 AnswerHello, the gauge of item #SL-RC-4 roof cap is 28 gauge.
 - Answered on June 3, 2020
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questionIt looks like there is an opening at the bottom front of the vent from the picture, is that the case and if so how high is it? it looks to be about 1/2 inch and the width vent coming up from the flat piece. Can someone please verify before I order it? Thank you for your help.   - Asked about product SL-RC-10
 AnswerNo, the black line (in pic) at the base of the collar is not an opening, the damper is inside vent.
 - Answered on July 28, 2015
 62% of 8 people found this useful. Was this useful to you? Yes (5) | No (3)

Ask a questionHello, looking to get this for my range hood ventilation. Putting on a flat roof what happens if snow builds up higher than vent? Thanks in advance   - Asked about product SL-RC-6
 AnswerShould the snow cover the cap the exhausting of the air will be greatly reduced, when the fan comes on eventually the hotter air will melt the snow build up in the proximity of the discharge. If the roof is pitched, often times the snow will accumulate less beneath the RC cap and the air will flow properly. The steeper the pitch the snow will accumulate less.
This image https://www.kitchensource.com/range-hoods/sl-rc-4b-l.htm is a submittal for the RC roof caps, the “C” dimension is the distance from the roof surface to the outlet which is 4’’.
 - Answered on October 20, 2016
 75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1)

Ask a questionwhat are the dimensions of the flange and do you have a detail drawing with all the dimension   - Asked about product SL-RC-4
 AnswerThe outside dimension of the base or flange on the RC-4 is 12 x 12”.
The “collar” is 4” in diameter and 3” long. A Detailed drawing can be found here: https://www.kitchensource.com/range-hoods/sl-rc-4b-l.htm
 - Answered on July 16, 2014
 67% of 3 people found this useful. Was this useful to you? Yes (2) | No (1)

Ask a questionWill these roof caps work with a ERV?   - Asked about product SL-RC-6
 AnswerYes, they will.
 - Answered on April 17, 2013
 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1)

Ask a questionI have a blower pushing 1200 cfm through 10" round. short run with 2 45 degree turns. how many cfm will this hood exhaust at .8 static pressure? Thanks   - Asked about product SL-RC-10
 AnswerThe Roof Cap is capable of exhausting over 1200 cfm.

At 1200 cfm, the Roof Cap will add approximately .1” of static pressure to the system. Because the cap is a static device, the amount of air that is exhausted through it is 100% dependent on the power of the fan that is pushing the air and the flow can only be determined by reading the performance curve of the fan at .9” static pressure.

The good news is that .1” of static pressure is the worst scenario because as the air flow is decreased, the pressure also decreases.
 - Answered on June 8, 2017
 60% of 5 people found this useful. Was this useful to you? Yes (3) | No (2)

Reference:
This item(s) is also sometimes listed under the following manufacturer numbers:

S and PS and P
RC-4, RC-6, RC-8, RC-10


  About KitchenSource
Contact Us
Gift Certificates
Accessibility Statement
  Order Status
Shipping Info
*Return Policy
  Privacy Policy
Security Info
Testimonials
  Product Index
Fair Price Guarantee
Shop by Brand
 

The Truth About KitchenSource Coupons

our facebook pageour facebook page
our pinterest pageour pinterest page
our youtube pageour youtube page
our instagram pageour instagram page
our twitter pageour twitter page
our google plus pageour google plus page
Customer Reviews
KitchenSource.com Reviews
Shopper Award internet retailer top 500 e-retailers KitchenSource.com is a BBB Accredited Business. Click for the BBB Business Review of this Kitchen Accessories in Stratford CT
 

pay by credit card or electronic checkpay by credit card or electronic check   Fast Checkout through Google

 
KitchenSource Logo
an Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901, Tel: (203) 374-5425, Fax: (203) 373-0810, email: support@kitchensource.com