Make the most out of a small space with Federal Brace's Freedom Brackets. Innovative hidden-bracket design creates a floating-counter appearance that provides maximum leg room so you knock knees no more! Proudly crafted in the USA, the Freedom brace is constructed from Cold Rolled Steel with an optional Black Finish.
(W = side to side) (D = front to back) (H = top to bottom)
Available Sizes:
8''W x 2''D x 8''H
10''W x 2''D x 12''H
10''W x 2''D x 12''H
14''W x 2''D x 14''H
16''W x 2''D x 16''H
18''W x 2''D x 18''H
20''W x 2''D x 20''H Weight Capacity: 375 lbs each Recommended Bracket Span: 18" - 20" Flange Width: 2" Mounting Hole Diameter: 1/4" Maximum Span: 20"
Good strong bracket, nicely painted by: PAUL MENDITTO ✔Verified Buyer from: BUSHKILL, PA on: February 4, 2021
Just what I needed to support my new countertop.
Good strong bracket, nicely painted by: PAUL D MENDITTO ✔Verified Buyer from: Bushkill, PA on: January 26, 2021
After installing the two brackets I needed, I liked the way they looked under my counter, so I ordered more and installed them just for show.
... by: anonymous ✔Verified Buyer from: -, - on: June 10, 2019
quality craftsmanship. Looks great.
Can't find better quality brace! by: Ranae ✔Verified Buyer from: Morrison, IL on: May 1, 2019
We had a moveable island instead of anchored, so needed a product to support the quartz countertop, but not limit our leg room with corbels or other supports. These brackets may cost a bit more, but you are getting what you pay for. They are produced from heavy dut piece of steel. There is not a weld at the right angle that could weaken over time. If yo need support for a counter top, these are what you need. You can purchase the screws/bolts to anchor or buy the kit to attach it.
Product seems to be good by: Steve Dailey ✔Verified Buyer from: Dimondale, MI on: July 22, 2014
We received our order very quickly. We have not actually used the product yet, waiting for our kitchen cabinets to come in then ordering our granite for our counter tops. The bases are going to be used to give our granite counter top support. They look good, good metal but we will see how much support they give after we install them. Will write a review after they are installed.
Just what I was looking for. by: Rich L. ✔Verified Buyer from: Long Beach, NY on: August 26, 2013
Very sturdy build to support the weight of my cantilevered granite table.
I would like to conceal the vertical leg of the bracket behind wall board. What fasteners would you recommend that I use so that I can place the wallboard directly over the vertical legs of the bracket without furring out the wall?
If flush fasteners are not recommended, please advise what fasteners you do recommend. - Asked about product FB-30058
Item FB-39972 is a optional installation kit that comes with:
12 screws (1/4" x 2-1/2" Hex Lag Screw)
Clear silicone sealant
This kit will install 3-4 brackets depending on the number of holes in the bracket.
We would only be able to recommend the screws that come with the kit, as we only know of the brackets being
installed with these.
- Answered on September 8, 2017
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)
I cannot find what the thickness of this freedom bracket is. Our counter fabricator says we need 3/8". I read somewhere that this bracket comes in 1/4", 3/8", and 1/2" thicknesses. - Asked about product FB-30053
The thickness depends on the size of the bracket:
Material Thickness:
1/4" - (8x8 - 12x12)
3/8" - (14x14 - 16x16)
1/2" - (18x18 - 20x20)
- Answered on June 7, 2016
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)
I was wondering if you had the 12x12 in black finish. I believe the FB # is 30049 according to their website.
Thank You for your help. - Asked about product FB-30048
Yes, we have access to this support bracket in black (FB-30049). Please, contact 800-667-8721 for updated pricing.
- Answered on July 28, 2014
100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)
Reference:
This item(s) is also sometimes listed under the following manufacturer numbers:
Made in the USA - In Black or Cold Rolled Steel
Product Reviews:
1.800.667.8721
Order Status
Kitchen Accessories
Made in the USA
