Cantilever Bar Support
Specifications
Todays Deal: $122.72 $76.57 -60% Off No Sales Tax, Except CT
Product Reviews
5
1
- Aluminum Matte Anodized Silver
- For overhanging counter bar top
- 55 lbs. load capacity per support
This Cantilever Bar Support mounts on the countertop and features a slanted single bar support. Made of sturdy aluminum, the countertop support has a load capacity of 25kg (55 lbs.) and comes in a matt anodized Silver finish. The countertop support is 170mm (6-5/8") high, with a top width of 140mm (5-1/2") and a bottom width of 100mm (4"). The cantilever bar support comes complete with mounting hardware.
(W = side to side) (D = front to back) (H = top to bottom)
Height: 6-5/8"
Ships via UPS/FedEx Ground
 | Very nice
by: Dana Fayette ✔Verified Buyer from: Walla Walla, WA on: July 15, 2009 |
| | This product worked great to elevate a bar on our kitchen island. Everyone loves it.
|
|
 | How is this mounted to the table top (below)? I see screw holes in the top plate, but nothing shows in the bottom plate. - Asked about product HA-505.14.926 |
| |  | This item bolts in from underneath, so you would need to have access to underneath the counter top of the bar to bolt in from underneath. As long as you have that access, this item should work fine.
|
| | | - Answered on July 14, 2018 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Is there any reason this support would not work to support a glass top, provided that we make sure to use the correct adhesive? - Asked about product HA-505.14.926 |
| | | Per Hafele, technically you could glue a piece of glass to it, but you would have to figure out a way to do that since there is no official instruction on how it can be done.
|
| | | - Answered on January 29, 2018 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Will this work for a bamboo bar? - Asked about product HA-505.14.926 |
| | | This item would work for any type of wood, however it bolts in from underneath so you would need to have access to underneath the counter top of the bar to bolt in from underneath. As long as you have that access, this item should work fine.
|
| | | - Answered on February 24, 2017 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Can this support a solid surface granite countertop? - Asked about product HA-505.14.926 |
| | | The load capacity of this bracket is 55 Lbs per support. You would need to space these close, about 12" apart, to provide adequate support. You would also need to confirm the weight of your item to determine if these brackets would work for your application.
|
| | | - Answered on May 3, 2016 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Is there any problems using this product on granite countertops, other than making sure we use enough brackets for support the weight? - Asked about product HA-505.14.926 |
| | | This item should support any type of top as long as it does not weigh over the 55 lbs. or provided you use enough to support the weight. This item does have to be screwed in to be secured so you would also need to check with your granite manufacturer to see how you can do this.
|
| | | - Answered on March 31, 2015 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Hafele cantilever support How far can top bar extend from center of support? - Asked about product HA-505.14.926 |
| | | We suggest staying within 10-12’’.
|
| | | - Answered on August 12, 2014 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
|
1.800.667.8721
Order Status
Kitchen Accessories
