Brushed Steel Finish
Table Legs Set
$46.28 - $215.08
No Sales Tax, Except CT
- Legs manufactured from 16 gauge steel. Also available in stainless steel and alumina.
- Uses universal aluminum bracket (included)
- Easy to install
- Adjustable foot height up to 1-1/8"
- Available in single leg or set of 4 legs package
The Hamburg legs by Peter Meier are stylish, flexible, and of high quality. The Hamburg legs are available in a range of heights and finishes to complement any office decor, space or design. Made of highest quality materials, the 16 gauge steel legs, stainless steel, or alumina with ABS leveling feet are guaranteed to withstand up to 660 pounds of weight. The aluminum bracket system allows quick installation or removal of legs.
(W = side to side) (D = front to back) (H = top to bottom)
Table Height Legs: 2-3/8" Diameter, 27-3/4"H
Counter Height Legs: 2-3/8" Diameter, 34¼"H
Bar Height Legs: 2-3/8" Diameter, 43"H
Capacity: 660 lbs. Per Leg
Ships via UPS/FedEx Ground
by: Adel Youssef from: Fairfax, Vi on: June 21, 2016
by: Ralph Getchell from: Pinellas Park, FL on: April 22, 2016
| ||We had a table top made to match our new kitchen countertops. Used these legs for the table. They look great and work great. (Be sure to tighten them!) Kitchensource has great customer service. They took time to help us with another leg we had cut to size for our countertop. They called to tell us our legs were on the way when they didn't need to call. I would recommend these legs as well as kitchensource for anything they sell.
by: Chris from: Littleton, CO on: October 20, 2014
| ||looks great and works perfectly! It is just what I needed
by: Jane Kirsch from: Chapel Hill, No on: July 16, 2013
| ||I can say that the ordering process was easy and the delivery very efficient. Since I ordered these for a client and the job is not completed yet I have not actually seen the legs so I can't comment although I assume they will be just what I expected.
|Amazing Customer Service!! Blown Away
by: Stephanie from: Cary, NC on: April 1, 2013
| ||I am beyond impressed with the customer service I received from Kitchen Source. I placed an order for 3 of these support legs yesterday, and they needed to be custom cut to a shorter length. I was a little worried about them coming in correctly like I had ordered. But I just received my order today, the NEXT day and they are perfect. I was told we may get them 4 days from now because it takes an extra day for trimming them. I could not be happier with the over the phone customer support, the quality of the product, or how quickly they shipped.
We will definitely be ordering from kitchensource.com for any future orders. Thank you so much!
|Great product, perfect fit and finish, sturdy
by: Adam Leicht from: Conway, AR on: December 3, 2012
by: JC Yeager from: Brighton, CO on: October 23, 2012
| ||This is a strong leg system that is easly installed and legs can easly be removed for storage. I used this system for a portable shooting table. I would have given it 5 stars but one leg was short the set screw necessary to secure the leg to the bracket. The supplier did mail the screw out promply and I am very pleased with the finished product.
by: Carol from: Doylestown, PA on: September 9, 2011
| ||Wonderful, outstanding, assembly very easy for a gal. Legs look very chic even in a country kitchen.
Definitely recommend, well built legs and come in colors!
|We need to know what the diameter of the circle part of the mounting bracket? - Asked about product PM-HT1709
| ||It is 1/16 smaller than the leg. If the leg is 2-3/8 inches, the Bracket would be 2-5/16 inches.
| ||0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)|
|Can I cut the Peter Meier Bar legs for a custom height? - Asked about product PM-HT1685
| ||Yes the legs can be cut. If you would prefer to cut yourself, there are two things to watch for.
1. Cut the bottom of the leg. Pop out the bottom ABNS Adjustment, then cut the leg and re-insert the foot.
2. Be extremely careful when cutting to make sure the cut is straight, perfectly straight, otherwise the center of gravity will be off causing the table to never be level.
Peter Meier (the manufacturer) can also cut them for a small charge leg. Please call our customer service at 1.800.667.8721 for this.
| ||100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)|
This item(s) is also sometimes listed under the following manufacturer numbers:
HT1683, HT1684, HT1685, HT1687, HT1688, HT1689, HT1690, HT1691, HT1692, HT1693, HT1695, HT1697, HT1698, HT1699, HT1701, HT1702, HT1703, HT1705, HT1707, HT1708