Single Bin Unit
Silver & White
$160.68 - $166.06
No Sales Tax, Except CT
- Single bin pull-out waste bin - 36 quart (9 gallon)
- Bottom mounted
- Made out of steel
- Storage area behind bin
- Quick installation with drilling template for floor and door
- Load capacity: 100 lbs.
- Easy front adjustment in all directions
- Soft and Silent closing
- Applicable in cabinets with face-frame or frameless
- Waste bin Included
- Frame available in Champagne, Chrome or Silver colors
- Waste bin available in Champagne or White color
- Also Available For Double Bins
This Single Bin Pull-Out Waste Bin by Hafele will help to save space and keep your trash hidden. The pull-out trash bin has a bottom-mount design with a steel frame. This pull-out waste bin is quick to install with drilling template for floor and door. The pull-out has Soft and Silent closing slides and these pull-outs are applicable in cabinets with overlay or inset doors. The waste bins are available in Champagne or Whit colors.
(W = side to side) (D = front to back) (H = top to bottom)
11 1/2" W x 23" D x 10" H (Side Rail Height)
Minimum height of opening: 19-1/4"
Minimum width of opening: Face frame: 11-1/2"; Frameless: 12-9/16"
Actual width of sliding unit: 11-1/8"
Depth at Top of Bin: 15"
Measurement from the bottom of the door to the screw hole: 6-1/4''
Ships via UPS/FedEx Ground
by: jessica from: galloway, Ne on: March 3, 2015
| ||Its like the Cadillac of kitchen cabinets!
by: Dan Deegan from: Sea Cliff, NY on: January 12, 2015
| ||high quality product
|Works great, nicely made.
by: Alan from: Redmond, OR on: September 8, 2014
| ||Well made and works great, but the "instructions" need instructions. Finally threw them out and winged it.
by: Frank from: Pasadena, CA on: September 4, 2014
| ||The product works great and looks and feels like is made of high quality. Instruction are a little bit challenging to follow but manageable. Took about 2 hours to install.
|Works Great and fits perfectly
by: John Williams from: Tampa, FL on: June 17, 2014
|Excellent Product, fast shipping.
by: John from: Cleveland, Oh on: April 29, 2014
| ||These are very well built and extremely sturdy, Kitchensourse was excellent to deal with and they were shipped quickly.
|Great quality, mediocre installation instructions
by: Doug from: Frisco, TX on: February 12, 2014
| ||The quality of the garbage can slide is great, much better than the one it replaced. Installation was challenging and required WAY more time and tools than I was expecting or the instructions led on. The most difficult part was attaching the existing cabinet door to the new unit. Caveat: I'm not a professional, just a 15 year homeowner.
by: Manny from: Miami, Fl on: December 26, 2013
| ||Great product, very well designed and built. Solid materials, and very easy to install. It closes very smoothly and strong at the same time. It is worth the money.
|Easy to install and works nicely.
by: David Barker from: Schaumburg, IL on: January 17, 2013
| ||The track was easy to install and I had a problem with it binding at times. I e-mailed Kitchensource.com and they sent me a new track the following day and it works perfectly. A customer service rep also contacted me to make sure the problem was solved, very good customer service! David.
|Easy to install and 10 times the quality of the one we replaced
by: Oliver Mayfield from: Mt. Pleasant, SC on: May 21, 2012
|Smooth yet very sturdy
by: Andy Giglia from: -, CT on: November 24, 2010
| ||Strong product - really does hold 90 lbs of pressure - especially when you manually compact the garbage to really fill that bag!
by: David H Huter from: Chicago, IL on: June 24, 2009
| ||Great Product!!!
|I am re-designing my kitchen, if I use a 12" cabinet that opening width is more than 11 1/2 ", will this item fit? should I just take out the door and attach it to the front of frame? Thank you. - Asked about product HA-502.56.200
| ||The width of the sliding unit is 11-1/8" that comes out of the door so the the door opening of 11 /12" wide is okay. Inside the cabinet body however, you would need at least 12 9/16" W because the brackets on the slides extend past the slides. The Overall dimension of the item is 12 9/16" W x 22 3/8" D
| ||0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)|
|This pull out trash system never states that it has ball bearing glides. That is important to me - would consider another model if this one does not have them. - Asked about product HA-502.56.800
| ||This trash pull out does have ball bearing slides for ease of motion.
| ||100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0)|
|Does the lid come with the frame and basket? - Asked about product HA-502.56.800
| ||This trash can does not come with a lid however, here is a link to our built-in trash cans that do come with lids: http://www.kitchensource.com/nobots/trash/d/built-in/1/atts/0,362/
| ||100% of 4 people found this useful. Was this useful to you? Yes (4) | No (0)|
|How does the waste bin and the rail its on come out. I can't find any leaver to release so I can clean the entire area. - Asked about product HA-502.56.800
| ||The newer version of that waste bin pullout should have 4 screws with heads facing up on top side of waste bin carriage. Loosening screws should allow carriage to slide forward in keyhole slot and allow carriage to be lifted off slides. There is no lever release on this unit.
| ||100% of 5 people found this useful. Was this useful to you? Yes (5) | No (0)|
This item(s) is also sometimes listed under the following manufacturer numbers:
502.56.800, 502.56.500, 502.56.200
an Aoife Company LLC Store
Avenue, Stratford, CT 06615
Tel: (203) 374-5425
Fax: (203) 373-0810