Your RV Series
Waste Container has been shipped fully assembled for ease in
installation. First remove the container(s) from the wire assembly,
place the framework inside your designated space for installation. In
the closed position, insert the front 2 screws, making sure the
framework is square with the front of the cabinet. | If sufficient
clearance, proceed to install the rear 2 screws and your installation
is complete. If sufficient clearance is not available, pull the
framework completely out and on the outside of each slide, you will
find a black trigger (figure A), which releases the slides and
disassembles the framework from the floor mounted slides. Remove the
framework, and being sure the slides are square to the front, install
the rear screws. Then re-assemble the framework, and your installation
is complete. |