Rev-A-Shelf at Cabinet Accessories Unlimited

Installation Instructions for Bottom Mount Waste Containers
(4WC-15DM-1, 4WC-18DM--2)

Rev-A-Shelf Bottom Mount Installation Diagram

Wood Classic Series Accessories are shipped fully assembled for ease of installation. First remove the container(s) from the wood assembly, and place the wood frame inside your designated space for installation. In the closed position, mark the four screw locations.
If sufficient clearance is available, install the front 2 screws, making sure the wood frame is square with the front of the cabinet. Proceed to install the rear 2 screws and refer to enclosed RV Series Door Mount Instruction Sheet for door mounting.
If sufficient clearance is not available, pull the framework completely out. On the outside of each slide, you will find a black trigger (figure A), which releases the slides and disassembles the framework from the floor mounted slides. Remove the wood frame, line up rear screw locations with your pencil marks and install the rear screws. Then re-assemble the wood frame.