Shown Here with Cabinet - Not Included
$78.96 - $167.34
No Sales Tax, Except CT
Optional Care Products
- Sonoma Series Wine Lattice (front & back included)
- For use in customer supplied cabinet - Cabinet Not Included
- Features square design
- Flush fit
- Four standard sizes available
- Manufactured from 3/4" x 7/16" solid hardwood mouldings
- Available in Red Oak, Maple, Hickory, Cherry and Alder Unfinished Wood
- 3-3/4" square openings
- Made in the USA
5 oz. Tube - Available in a 3 or 12 Pack
*Combination of natural un-bleached beeswax & mineral oil
*Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack
*Mixture of white mineral oil & beeswax
*Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case
*Makes repairs and fabrication a foolproof operation
*Can be used to touch-up tables with Varnique or Tuff-Var finish
*Can also be used on oil finish tops to convert them to varnique tops
Five different wood choices allow you to match this Sonoma Series Wine Lattice to any area of your home. With your choice of Unfinished Red Oak, Maple, Hickory, Cherry or Alder wood, the wine lattice is also available in four standard sizes. The wine lattice features a square design and fits flush by any cabinet.
(W = side to side) (D = front to back) (H = top to bottom)
L3280: 17" x 29", 6 lbs. - 18 bottles
L3260: 17" x 36", 7 lbs. - 21 bottles
L3240: 24" x 30", 8 lbs. - 24 bottles
L3220: 24" x 43", 10 lbs. - 28 bottles
Ships via UPS/FedEx Ground
by: Bert Rivera from: Camarillo , Ca on: January 28, 2014
| ||Decent wine rack for its size. Wish it was sturdier.
|Can this wine rack be installed horizontally or vertically? - Asked about product NA-L3280QUF9
| ||Yes, you can flip these to be used horizontally or vertically, and they can be trimmed to fit flush with your cabinet.
| ||0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)|
|Can the depth be trimmed to fit? - Asked about product NA-L3240QUF9
| ||The height and width can be trimmed to fit your custom application. What you are ordering are two pieces of unfinished wood lattice, so the depth (from front to back) would be determined by how close you placed the two pieces together.
| ||100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)|
|Does this rack come with a trim on the front? If so, does the width include that in the dimensions?
How should we determine that appropriate size? - Asked about product NA-L3260MUF9
| ||No the trim is not on the front of this. This would be the lattice only.
You would need to order the size big enough to fit in your frame you are looking to put in and trim it to the size if needed.
| ||75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1)|
This item(s) is also sometimes listed under the following manufacturer numbers:
L3280OUF9, L3280MUF9, L3280HUF9, L3280CUF9, L3280QUF9, L3260OUF9, L3260MUF9, L3260HUF9, L3260CUF9, L3260QUF9, L3240OUF9, L3240MUF9, L3240HUF9, L3240CUF9, L3240QUF9, L3220OUF9, L3220MUF9, L3220HUF9, L3220CUF9, L3220QUF9