Cabinets not included
Wine Bottle Lattice
$53.57 - $156.18
No Sales Tax, Except CT
Optional Care Products
- Panels are produced from sturdy hardwood moldings ¾" W x 7/16" D with rounded edges
- Glued and mechanically fastened at joints
- Wood Species available: Alder, Cherry, Hickory, Maple and Red Oak
- Lattice is unfinished so that it can be painted or stained to match your cabinetry
- Bottle openings are 4" W x 4" D
- Lattice is easily cut to desired size
- To be installed into a pre-existing cabinet
- Includes front and back lattice
- Available in four sizes: 17" W x 29" H, 17" W x 36" H, 24" W x 30" H and 24" W x 43" H
5 oz. Tube - Available in a 3 or 12 Pack
*Combination of natural un-bleached beeswax & mineral oil
*Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack
*Mixture of white mineral oil & beeswax
*Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case
*Makes repairs and fabrication a foolproof operation
*Can be used to touch-up tables with Varnique or Tuff-Var finish
*Can also be used on oil finish tops to convert them to varnique tops
Store and display your wine collection with these solid hardwood wine lattices from Omega National. These wine lattices are available in several sizes and can be easily cut to size to fit any application. The 17" W x 29" H lattice can hold 11 bottles of wine, the 17" W x 36" H lattice holds 14 bottles, the 24" W x 30" H lattice holds 18 bottles and the 24" W x 43" H lattice can hold up to 28 full-sized bottles of wine. The standard series of wine lattice are available in Red Oak, Maple, Hickory, Cherry or Alder Unfinished Wood. The standard series wine lattices are made from moldings 3/4" deep and 7/16" wide. This series features glued and mechanically fastened joints and 4" W x 4" H bottle openings. The Premium Series of wine lattices features 4-1/4" W x 4-1/4" H bottle openings and is constructed from 11/16" W x 11/16" H hardwood moldings. The wine lattices are available in Red Oak, Maple, Hickory, Cherry, or Alder woods. Premium wine lattices have routed openings for a unique look.
(W = side to side) (D = front to back) (H = top to bottom)
Available in four sizes: 17" W x 29" H, 17" W x 36" H, 24" W x 30" H and 24" W x 43" H
Ships via UPS/FedEx Ground
|WORKED JUST RIGHT
by: JEFF from: TUCSON, AZ on: October 7, 2014
| ||was able to cut to fit in a 18 x 30 wall cab. Ripped to size on table saw.
I cut the back rack 3/4" shorter to hold bottles more level.
by: Peggy from: williamstown, NJ on: June 17, 2014
| ||The wine lattice arrived quickly. It looks nice and is what we expected. We have not installed it yet so I cannot comment on that part.
|Great Product--as decribed
by: Dennis Smith from: Vail, AZ on: October 22, 2012
| ||Cutting the lattice was fairly tricky...until I decided to clamp them together to ensure they are the exact same size and same cut. Installed to no problems...looks great in my new bar!
by: william from: silver spring, md on: June 13, 2012
| ||I got confuse when i purchase the wine lattice cabient. I thought is was the entire cabinet but only got the lattice. you need to specify in details about the product. good guality but not what I was looking for.
by: Lynn from: St Petersburg, Fl on: March 16, 2011
| ||I always wanted a wine rack. With my kitchen renovation I was able to work it in with my cabinet design.
Wine rack is quality product. It is easy to size and stains beautifully.
by: Don from: Indiantown, fl on: December 6, 2010
| ||Just what I needed, Great quality
by: laura from: greensboro, nc on: November 30, 2009
| ||If you need to customize a spot in your kitchen, this item is perfect. You can match your cabinet colors with the unfinished wood and make it look as if it belonged all along. Easy to cut, prime and stain.
by: John from: Kingwood, TX on: April 6, 2009
| ||Product was of good quality and just fit my application perfactely.
|Does this product includes the glass rack in the bottom of the wine rack?
- Asked about product NA-WRL-2430-MA
| ||It does not include the stemware rack. It is sold separately on this page: http://www.kitchensource.com/wine-racks/na-m4600ouf2.htm
| ||0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)|
|How are the lattices installed into the cabinet? - Asked about product NA-WRL-2430-CH
| ||We do not have the installation instructions for Lattice. It is similar to the bottle rack installation, described on this page: http://www.kitchensource.com/wine-racks/pdf/Lattice_Example_Installation_Sheet.pdf
| ||75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1)|
|What is the depth front to back on this unit?
- Asked about product NA-WRL-1729-CH
| ||The depth would be the depth of your cabinet. When you purchase this item, you get a front and back lattice, but they are not connected to a box. They can be cut and fit into any cabinet.
| ||80% of 5 people found this useful. Was this useful to you? Yes (4) | No (1)|
This item(s) is also sometimes listed under the following manufacturer numbers:
WRL-1729-RO, WRL-1729-MA, WRL-1729-CH, WRL-1729-HI, WRL-1729-AL, WRL-1736-RO, WRL-1736-HI, WRL-1736-AL, WRL-2430-RO, WRL-2430-HI, WRL-2430-CH, WRL-2430-AL, WRL-2443-RO, WRL-2443-HI, WRL-2443-AL, WRL-1736-CH, WRL-1736-MA, WRL-2430-MA, WRL-2443-CH, WRL-2443-MA
an Aoife Company LLC Store
Avenue, Stratford, CT 06615
Tel: (203) 374-5425
Fax: (203) 373-0810