Minimum opening resistance, multi-position stop function and soft opening and soft closing mechanism
Time-saving assembly provided by tabs, pre-mounted Euro screws and clip mounting of front panel and cross bar, eccentric adjustment or front panel
Adjustment facility: Height adjustment ±1.5 mm, side adjustment ±1.5 mm, tilting angle ±1.5°, holding power
Note: Use two Free up sets for door widths ≥1800 mm (70-7/8")
Includes: 1 Parallel lift-up front fitting set (right/left), Front mounting material for wood doors or doors with wide aluminum frame, Installation instructions, Paper drilling template, 1 Cover cap set (2 pcs. 1 left/1 right)
Crossbar and adapters for glass front panels or narrow aluminium frames (if applicable)are required and must be ordered separately - See Accessories
For one-piece wood, glass or aluminum frame doors, this Parallel Lift-Up Front Fitting Lid Stay - Free Up by Hafele can be used with a 12-5/8" - 23-5/8" (320-600mm) Door Height and a 4-38 lb Door Weight. Ideal for upper cabinets or front panels, the lid stay has a modern design with clear-cut contours as well as minimum opening resistance, multi-position stop function and soft opening and soft closing mechanism.
In addition to this item, it appears that I should order a crossbar too. Is this correct? If so, what size crossbar do I need for a door that is 18" high and 17 1/2" wide? Not clear to me.
Thanks! - Asked about product HA-372.33.520
The crossbar for a 17-1/2 inch width would be item #HA-372.33.692. The crossbars are trimmable so the size can be adjusted as needed. Item #HA-372.33.692 is 18-11/16 inches long.
- Answered on July 5, 2023
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)
This item(s) is also sometimes listed under the following manufacturer numbers: