For controlling white LED lights, the Hafele LOOX Premium 6-Channel Remote Receiver is available for 12 Volt or 24 Volt lights. A maximum of 10 remote receivers can be combined, and the receiver has 6 slots and comes in a black finish.
I am installing 24v under cabinet strip lighting which is split into two systems as the length of under cabinet lighting that I am installing exceeds the wattage capacity of one driver. I have a 833.77.914 driver and a 833.77.901 driver to power both systems. I want both drivers to operate together and to have the ability to dim together. The "contact" wattage of your dimming modular switches seem to be insufficient to handle this much wattage if I am understanding your catalog description and the term "contact wattage correctly. The Premium 6-channel Remote Receiver is listed with a wattage capability of 120 watts it looks like this might be my answer but it would have to be somehow hooked up to both of my drivers. The catalog shows two leads going from the Remote Receiver to a single driver. My question is can those two power leads go to two different drivers so that the Remote Receiver has sufficient wattage to power and control both segments of strip lighting powered by the two drivers.
Second Question: Your 2017 lighting catalog states that the Premium 6-channel Remote Receiver "Consists of a Remote Receiver and a 6-channel remote control" yet most vendors state that "Remote Controller not included" which is it? - Asked about product HA-833.77.785