Electro-Plated Zinc
Black
Epoxy-White
Installed View
$17.20 - $24.69 No Sales Tax, Except CT
Product Reviews
5
2
- Side Mounted pair rated to hold up to 100lbs
- Drawer Width should not Exceed Slide Length
- Compatable with Traditional and 32mm Euro Hole Patterns
- Material: Steel
- Finish: Electro-Plated Zinc, Epoxy-White, or Black
- Silent Open and Close
- Ball Bearing Drawer Slide
- Detent In Prevents Accidental Opening
- For Drawers 1-1/16'' Less Wide than Cabinet Opening
- Lowest Profile Drawer Slide at 1-7/16''
- Easy Lever Disconnect
- Face Frame Bracket Available
- Optional Varianta Mounting Screws, Flat Head 6mm Euro System Screw, or #8 Pan Head Mounting Screws
The 3732 Drawer Slide by Accuride is a great general use slide for most projects. Each pair of 3732 slides is capable of supporting 100lbs with drawers up to 16'' wide. A hold-in detent helps your drawers stay closed even if your cabinet is slightly unlevel. With a small form factor, the 3732 slide is perfect for tight fitting shallow drawers, requiring only 1/2'' side space for mounting. A 2'' adjustment bracket helps to ensure your slide will be a perfect fit, especially for face frame cabinets. Mounting screws are also available. The 3732 Drawer Slide is available in multiple finishes to match your drawers as they already are.
(W = side to side) (D = front to back) (H = top to bottom)| Installed Length | Travel Length | Width | Height | Total Required
Side Clearance | Minimum
Drawer Height |
|---|
| 11-7/8'' | 11-1/2'' | 1/2'' | 1-7/16'' | 1-1/16'' | 1-7/16'' | | 13-3/4'' | 14'' | | 15-3/4'' | 16'' | | 17-3/4'' | 18'' | | 19-3/4'' | 20'' | | 21-5/8'' | 22'' | | 23-5/8'' | 24'' | | 25-5/8'' | 26'' |
Ships via UPS/FedEx Ground
 | Excellent hardware, stands the test of time!
by: Joe Edwards ✔Verified Buyer from: Centreville, MD on: March 28, 2016 |
| | These are really good drawer glides and I have used them in both kitchens I have renovated. I highly recommend them.
|
|
| Great quality and fit
by: Julie ✔Verified Buyer from: Cedar rapids, Ia on: March 15, 2016 |
| | Bought to replace slide on dresser. Easy to install. Only had to change one screw location.
|
|
 | Does this set come with tail pieces or do I need to purchase them separately. - Asked about product HA-3732-16 |
| |  | This side mounted full extension with hold-in detent slide includes a pair for the left and right side. We are unsure of what you mean on the 'tail pieces'. The only optional part which would be sold separately are the face frame brackets if you needed to mount to a face frame instead of the sidewall.
|
| | | - Answered on April 25, 2016 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Are there two slides in an order of one as shown in the picture? - Asked about product HA-3732B-22 |
| | | This item comes with one pair of slides for one drawer.
|
| | | - Answered on November 3, 2015 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
This item(s) is also sometimes listed under the following manufacturer numbers:
 | | Accuride
3732-12, 3732-14, 3732-16, 3732-18, 3732-20, 3732-22, 3732-24, 3732-26, 3732B-12, 3732B-14, 3732B-16, 3732B-18, 3732B-20, 3732B-22, 3732W-12, 3732W-14, 3732W-16, 3732W-18, 3732W-20, 3732W-22 |
|
1.800.667.8721
Order Status
Kitchen Accessories
