$7.96 - $11.06
No Sales Tax, Except CT
- Knape & Vogt Light Duty Drawer Slide
- Available Lengths: 12'' - 24''
- Available Finishes: Brown and Zinc
- Slide Type: Roller Bearing
- Bearing Type: Nylon Rollers
- Load Class: 60 lb.
- Mounting: Side
- Open Close Features: Hold-In Anti Rebound
- Material: Steel
- Disconnect: Lift-Out
- Sold as both Individual Pack and Bulk Pack
- Individual Pack: 1 pair with screws
- Bulk Pack : 10 pairs without screws
- Recommended Fasteners: #6 x 13/32" Phillips Pan Head
- Limited Lifetime Warranty
A 60 lb. class 3/4 extension drawer slide by Knape & Vogt is designed for kitchen cabinets, bathroom vanities, and architectural woodwork. With a clearance of 1/2," this slide is recommended for drawers up to 18" wide. It features ball bearing nylon roller, stay close design, positive stop lever prevents accidental drawer removal. Can be purchased individually (1 pair with screws) or in bulk (10 pairs without screws).
(W = side to side) (D = front to back) (H = top to bottom)Clearance:
.50" +.03" - 0"Height:
.50"/12.7mmMax. Recommended Drawer Width:
Ships via UPS/FedEx Ground
|Dear Kitchen Source,
I have a bent drawer track and need a replacement. It's:
Grant 336 C. R. (right side), 19.75" long.
Please let me know if I can order a replacement from you (it doesn't have to be that brand.)
I could provide a photo if you replied with an email address.
- Asked about product KV-1260P-20
| ||Yes, you can use these glides to replace your current ones, but please use both glides when replacing the current one.
| ||- Answered on August 26, 2020|
| ||0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)|
This item(s) is also sometimes listed under the following manufacturer numbers:
|Knape and Vogt|
1260B-12, 1260B-16, 1260B-18, 1260B-20, 1260B-22, 1260B-24, 1260B-BRN-12 , 1260B-BRN-14 , 1260B-BRN-16, 1260B-BRN-20 , 1260B-BRN-22 , 1260B-BRN-24, 1260B-BRN-18 , 1260P-12 , 1260P-16, 1260P-18, 1260P-20, 1260P-22