Chlorides – Today chlorides are found in most soap, detergents, bleaches and cleansers; chlorides can be aggressive to stainless steel. However, chlorides are very water-soluble. Therefore, thorough rinsing of your sink after each use to remove any chloride residue and a weekly scouring is all that is required to keep your sink looking bright and shiny.
Scratches - Like many metallic surfaces, your stainless steel sink will scratch. These are merely usage scratches and over time will blend into the overall finish of your sink.
Water Quality – The quality of your water can affect your sinks appearance. If your water has high iron content, a brown surface stain can form on the sink giving the appearance of rust. Additionally, in areas with a high concentration of minerals, or with over-softened water, a white film may develop on the sink. To combat these problems, we suggest that the sink be towel dried after use, and again, on a weekly basis, the sink should be cleaned.
Food - Heavy salt concentration or foods containing high levels of salt should not be allowed to dry on the sink surface. Rinse your sink thoroughly after use.
Cutting – Your sink is designed to serve as many things, but should not be used as a cutting board or chopping block. This type of use will lead to deep scratches in the sink finish and will dull your knives.
Most dirt and stains – Use soapy water or ammonia-based cleaner.
Watermarks – Wipe with damp cloth then towel dry.
Disinfecting – Occasionally wipe surface with diluted household bleach (1 part water/1 part bleach).
Maintenance – Occasionally clean by filling the sink one-quarter full with a 50/50 water/bleach solution. Let soak for 15 minutes, then wash sides and bottom as solution drains and thoroughly rinse.
Following these recommendations for the care and cleaning of your stainless steel sink will help to ensure that your stainless steel sink will provide you with many years of service.
This Single Bowl Undermount Sink by Noah Collection has a unique L-shaped bowl and is made out of 18-gauge, 304 series stainless steel with a Brushed Stainless Steel finish. The undermount sink measures 21-7/8" W x 15-1/8" D overall with inside dimensions of 19-5/8" W x 12-7/8" D x 7-1/2" H. The sink has a full undercoat over sound deadening pads to reduce excess noise from dishes or running water. Mounting hardware and a template are included. Sink grids are also available separately. Ships via UPS/FedEx ground.