Scroll To Top
No Sales Tax, Except CT Orders Free Shipping on all Orders over $99 (Contiguous USA Only) Easy Returns
Free Shipping Over $99
Call Us at 1.800.667.87211.800.667.8721
space
Scroll To Top

Versa Shelves by Rolling Shelves, for Microwaves, Pantries, etc

Available in Multiple Sizes
Kitchen Versa Shelves by Rolling Shelves
Dovetail Detail
Custom Drawer Organizers

$151.23 - $222.30
No Sales Tax, Except CT
sale Get $25 Store Gift Card on orders over $500
sale Get $50 Store Gift Card on orders over $1000
This is a custom/made-to-order item - Read Policy
Shipping:
 Free Shipping
Model:
Choose a product from the options above
Qty?

Product Reviews

Features:

  • Versa
  • Built using 4" tall 9-ply baltic birch sides
  • Uses Dovetail corners
  • Front rail eliminated to allow items such as Microwaves, Printers, Keyboards, Televisions, etc. to be pulled out without obstruction
  • Bottom made of 1/2" birch plywood
  • Width requires 1” additional space to fit the guides
  • Includes 3/4 Extension guides, hardware, and instructions - 22" slides pull out 17"; 20" slides pull out 15"
  • Can hold up to 75 lbs with standard 3/4 guides (including the weight of shelf). Optional Full Extension Guides increase the capacity up to 100lbs (including the weight of the shelf) - when upgrading order to full extension guides, 3/4 extension guides will not be included
  • Available ready to paint or stain or pre-finished with a satin lacquer
  • Multiple widths & depths to choose from
  • Option Upgrade: Full extension slides must be ordered to reach the 100lb. Weight load capacity - See Accessories
  • Comes complete with guides designed to be installed to the interior walls of your cabinet
  • Can be installed onto a cabinet's floor or full shelf with the optional "Mount to Shelf" bracket kits - sold separately under accessories below - the brackets help make installing the pull out shelves a easier and includes hardware to mount 1 RollingShelf
  • Lifetime Warranty on Shelves
  • These items are made to order and cannot be cancelled after 3 days. They are non-returnable.
  • Wood portion Made in the USA Made in the USA

    Optional Accessories: Click here to purchase
  • Full Extension Ball Bearing Slides allow you to extend your new shelf completely so you can access all the items in the back of your cabinet
  • Rear mount socket sets are required for those installations where you cannot mount your shelf to an existing cabinet frame or an existing full-depth shelf
  • Mount to shelf brackets makes installing the pull out shelves a little easier. They are bottom mount to existing full depth shelves or the floor of a kitchen cabinet.


Optional Care Products:
Board Cream to Protect Wooden Products
5 oz. Tube - Available in a 3 or 12 Pack *Combination of natural un-bleached beeswax & mineral oil *Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
More Info
Oil Care for Wood Products
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack *Mixture of white mineral oil & beeswax *Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
More Info
Non-Toxic Polyurethane Gel for unfinished products
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case *Makes repairs and fabrication a foolproof operation *Can be used to touch-up tables with Varnique or Tuff-Var finish *Can also be used on oil finish tops to convert them to varnique tops
More Info
Boos Care & Maintenance Packs
Oil & cream available in sets with applicator *Anti-bacterial sponge prevents bacteria growth in sponge and on wood surfaces *Applicator also sold separately
More Info
Boos Care & Maintenance Kit
New colored P.O.P. box design includes (1) Applicator, (1) Mystery Oil Bottle and (1) Board Cream Tube. All the content is securely placed in a custom die cut insert tray with simple care & maintenance instructions on the back of the box
More Info

Description:

The Versa Pull-Out Rolling Shelf is an innovation by Rolling Shelves designed for those that want to make full use of their limited cabinet and or counter top space. The Versa is built using 4" tall 9-Ply Baltic Birch sides and Rolling Shelfs Famous Dove Tail corners. The front rail has been eliminated to allow items such as Microwaves, Printers, Keyboards, Televisions, etc. to be pulled out without obstruction. The bottom of the VERSA is made of 1/2" Birch Plywood. No particle board here! This is a serious Shelf designed to carry your heaviest items as it holds up to 100 lbs. with the optional full extension guides (sold separately). Available ready to paint or stain as well as pre-finished with a beautiful Satin Lacquer. The Versa comes complete with guides designed to be installed to the interior walls of your cabinet. See the Hardware Options page for more choices. The New VERSA, carries our limited LIFETIME warranty.

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

16" - 30" Width (Opening requires 1” additional space to fit the guides)
E.g. 16" needs a 17" opening and so on …
12" - 22" Depth
Full Extension Slide Upgrade and Slide Accessories:
BU-HFE-12 image
BU-HFE-12
Rolling Shelves Do-It-Yourself 12" Full Extension Slides (Pair) Requires mount to shelf brackets if mounting unit to a shelf
$35.03 $61.57 43% Off
How Many?
BU-HFE-14 image
BU-HFE-14
Rolling Shelves Do-It-Yourself 14" Full Extension Slides (Pair) Requires mount to shelf brackets if mounting unit to a shelf
$35.03 $61.57 43% Off
How Many?
BU-HFE-16 image
BU-HFE-16
Rolling Shelves Do-It-Yourself 16" Full Extension Slides (Pair) Requires mount to shelf brackets if mounting unit to a shelf
$35.03 $61.57 43% Off
How Many?
BU-HFE-18 image
BU-HFE-18
Rolling Shelves Do-It-Yourself 18" Full Extension Slides (Pair) Requires mount to shelf brackets if mounting unit to a shelf
$35.03 $62.36 44% Off
How Many?
BU-HFE-20 image
BU-HFE-20
Rolling Shelves Do-It-Yourself 20" Full Extension Slides (Pair) Requires mount to shelf brackets if mounting unit to a shelf
$34.45 $67.96 49% Off
How Many?
BU-HFE-22 image
BU-HFE-22
Rolling Shelves Do-It-Yourself 22" Full Extension Slides (Pair) Requires mount to shelf brackets if mounting unit to a shelf
$34.45 $75.48 54% Off
How Many?
BU-CO260 image
BU-CO260
Rolling Shelves Do-It-Yourself Mount to Shelf Brackets Optional for mounting directly onto a cabinet's floor or full shelf
$16.13 $25.40 36% Off
How Many?
BU-CO259 image
BU-CO259
Rolling Shelves Do-It-Yourself Pair of Rear Mount Sockets, For 3/4 Extension Slides
$14.03 $22.74 38% Off
How Many?
BU-CO261 image
BU-CO261
Rolling Shelves Do-It-Yourself Rear Mount Sockets, For Full Extension Slides
$13.62 $22.05 38% Off
How Many?
Ship Method:

    Ships via UPS/FedEx Ground


Your questions that we answered:
Ask a questionWhen using the bottom mount brackets, how high is the shelf from the bottom of the cabinet? I have a total of 15" height and want to fit a 14" tall appliance. Also, if I have 15 inches of depth, will the 14" deep shelf fit, or does it need extra space in the back?   - Asked about product BU-CO366
 AnswerItem BU-CO366 will sit 1/4" H off the cabinet floor.
 - Answered on January 19, 2022
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questionThe dimensions of my cabinet are 16 5/8" deep and 31 1/2" inches in width. Will the 16" by 30" rolling versa shelf fit and install correctly? You mentioned that there should be 1" extra width to accommodate the slides. My cabinet space has an extra 1 1/2" inches. Is that to much? Will the shelf fit with the slides fit snugly against the cabinet wall?   - Asked about product BU-CO420
 AnswerFor item BU-CO420, having 1-1/2" extra is fine - once the slides are installed, you will have 1/4" extra on the sides if installed directly in the middle.
 - Answered on July 1, 2019
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questiondifference between bu-co444 and bu-co362   - Asked about product BU-CO362
 AnswerItem bu-co444 is typically used in kitchen cabinets, as it has a frame on all 4 sides to prevent items from falling out of the rolling shelf. Item bu-co362 is typically used in an office or countertop setting when you would want to be able to slide away product to make for extra space, but do not need to worry about the product falling off the shelf.
 - Answered on May 9, 2018
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questionHi! I'm looking for a pull out shelf, bottom-mounted, that's about 14 1/2" wide. My cabinet opening is 15" wide and the inside width of the cabinet is 17 1/4" wide. Is there anything like this out there? Thanks!   - Asked about product BU-CO340
 AnswerYou would need model #BU-CO342 as this is a 14" wide pull out shelf. You will need an extra inch on the each side to accommodate for the 1/2" glides - https://www.kitchensource.com/shelves/bu-versa.htm?p=BU-CO342
 - Answered on April 23, 2018
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questionCan the shelf be mounted to the floor of the cabinet?   - Asked about product BU-CO340
 Answer No. The guides on the Versa are designed to mount to the Vertical cabinet walls. If you order the OPTIONAL MOUNT to SHELF brackets (CO260), then you can mount to the Floor or full depth shelf. If you order the REAR MOUNT Sockets (CO259 or CO261), you can attach to the BACK wall, however, you still must attach the front of the guides to the front of the cabinet. This can be done by affixing the guide to the Face frame, which may involve shimming or other job site configuration.
 - Answered on April 21, 2017
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questionWhen you are asking for dimensions are you asking for finished sizes? my width is actually 22.5" wide. Just wondering if I should modify for allowances for hardware.   - Asked about product BU-CO343
 AnswerThe Width requires 1" additional space to fit the guides. If you have 22-1/2" W for the door opening, then you would want to order the 21-1/2" W.
 - Answered on March 20, 2017
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questionHello, we just received our order for BU-CO363 and BU-HFE-22. We did receive the L-Brackets to mount the shelve in our cabinet. Was this an a la carte option? Thanks, Nick   - Asked about product BU-CO363
 AnswerIf you ordered the item with full extension slides, you would have also needed to order the Mount to Shelf Bracket Model #BU-CO260, if you are not able to mount to the side walls of the cabinet.
 - Answered on August 29, 2016
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questionI would just like to confirm that both BU-CO 447 and 356 will fit into my cabinet since these are non-refundable. My cabinet has brackets that connect the doors. The measurements are as follows: The width is 26 inches (space between brackets on either side). I believe that would mean I would need a 24 inch width correct? The depth is 24 inches. I believe that would mean I would get the 22 inch depth cabinet. Also, as I will be using this pull out cabinet to hold a vitamix, coffee maker, and toaster, I will need the full extension pull out accessory correct? That would allow me to pull the shelf all the way out? Is the corresponding product number BU-HFE-22?   - Asked about product BU-CO375
 AnswerYes that is correct, for a 26" opening you will need to get the 24" as the shelves guides need that extra inch to be installed. Yes, you would need to get model BU-HFE-22 for the full extension guides. Also remember to get your mounting brackets as well if you're mounting to a shelf.
 - Answered on August 11, 2016
 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)

Ask a questionHi, the cabinet space is 15" deep by 33" wide. Can the 14" x 30" model be installed in this cabinet?   - Asked about product BU-CO330
 AnswerWidth requires 1" additional space to fit the guides so on this model, the 30" W unit, with the slides would be 33" W. These rails are side mounted. So if side mounting, you would need wood blocks on the side to take up the slack space of 2" Or, you would need to add the BU-CO260 Rolling Shelves Do-It-Yourself Mount to Shelf Brackets to mount down to a shelf.
 - Answered on May 27, 2016
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Ask a questionHi: What are interior dimensions? I am trying to find a pull out shelf to accommodate my printer with these dimensions: 27.4 (W) x 18.2 (D), weight = 61 lb. My space is 29.5" wide. Thanks for your help.   - Asked about product BU-CO410
 AnswerThe sides are each 1/2" wide, making the total of both 1", so the inside width will be 1" narrower than the total width of the shelf. So if you were to order the 28" width, inside, you're only going to have 27" and then you need an extra 1" for the slides on the outside. Unfortunately, if your printer is 27.4", you would need the 29" width, but that won't fit your opening space.
 - Answered on February 23, 2016
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

Reference:
This item(s) is also sometimes listed under the following manufacturer numbers:

Rolling ShelvesRolling Shelves
CO340, CO342, CO344, CO346, CO348, CO350, CO341, CO343, CO345, CO347, CO349, CO351, CO328, CO330, CO332, CO334, CO336, CO338, CO329, CO331


  About KitchenSource
Contact Us
Gift Certificates
Accessibility Statement
  Order Status
Shipping Info
*Return Policy
  Privacy Policy
Security Info
Testimonials
  Product Index
Fair Price Guarantee
Shop by Brand
 

The Truth About KitchenSource Coupons

our facebook pageour facebook page
our pinterest pageour pinterest page
our youtube pageour youtube page
our instagram pageour instagram page
our twitter pageour twitter page
our google plus pageour google plus page
Customer Reviews
KitchenSource.com Reviews
Shopper Award internet retailer top 500 e-retailers KitchenSource.com is a BBB Accredited Business. Click for the BBB Business Review of this Kitchen Accessories in Stratford CT
 

pay by credit card or electronic checkpay by credit card or electronic check   Fast Checkout through Google

 
KitchenSource Logo
an Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901, Tel: (203) 374-5425, Fax: (203) 373-0810, email: support@kitchensource.com