The Alpha Industrial Table Leg Set comes as a pair of stylized legs shaped as an "A". The Alpha Table Legs are designed for the DIY'er, with an open ended design and loads of specifications so that you can know ahead of time if you can use the Alpha in your project. These table legs are designed with a 500 lbs weight rating as well as accessory top plates for wide applications over 48'' from bracket left to bracket right, as well as pilot holes for a stabilizing lower bar. If you have an old countertop which is in need of repair, the Alpha Industrial Table Leg is second to none with stylish, sturdy, stainless steel.
(W = side to side) (D = front to back) (H = top to bottom)
Specifications are for a Single Leg. Two Legs are Included in each order.
Load Capacity Per Leg: 500 lbs.
Alpha Table Leg:
Overall: 30''W x 2''D x 29-1/2''H
Top Mounting Area: 12-1/2''W x 2''D
Face Plate: 3/8'' Thick
Border Plating: 1/4'' Thick
Apex Table Leg:
Overall: 24"W x 5"D x 28"H
Top Mounting Area: 12-1/2" x 5"
Face Plate: 0.18" Thick