Cold Rolled Steel
$84.81 - $145.86
No Sales Tax, Except CT
- Supports Countertops with up to 20'' Projection
Available in Stainless Steel or Cold Rolled Steel
Low Profile Gusset Design Leaves Plenty of Room Below
No Holes in Top Flange
500 lbs support per Bracket
- Optional Bracket Backers available to protect Mounting Surface (See Optional Bracket Backers)
- Made in the USA
- Recommended Mounting Kit: FB-439972
- 12 Screws (1/4'' x 2-1/2'' Hex Lag Screw) and Silicone Sealant
- Kit Sold Separately
Portland Countertop support bracket is perfect to use on an island overhang or a wall hung counter. Wall hung counters require the additional support of the gusset between the two flanges. This gusset gives the Portland Countertop support bracket a carrying capacity of 500 pounds per bracket. Available in stainless steel to match appliances or raw steel which will need to be painted and can blend in with your wall color, will give you the strength required for either application. Sizes range from 10x10 up to 16x16. Select your size so that no more than 4" of counter is unsupported.
(W = side to side) (D = front to back) (H = top to bottom)
Material Thickness: 1/4''
Mounting: Three .26'' Holes
Capacity: 500 lbs / Bracket
Max Recommended Span: 30''
Maximum Overhang: 4''
Available in Multiple Styles
Available in Packs of 50, 100, 200 or 500 Pieces
Ships via UPS/FedEx Ground