Shown with Solid Top
Breakfast Bar Support
$154.50 - $154.67 No Sales Tax, Except CT
Product Reviews
5
2
- Square angled breakfast bar supports
- Mounts on the countertop
- Available in 3 different heights
- For solid tops
- Maximum load capacity: 40 kg (88 lbs.) per tube support
- Maximum distance between supports: 900mm (35-7/16”)
- Made out of steel with a Stainless Steel Effect finish
- Includes mounting hardware
- Sold each
- Ships via UPS/FedEx Ground
These Square Angled Countertop Supports by Hafele will help to increase countertop space. The countertop supports have a maximum load capacity of 40 kg (88 lbs.). These supports are made out of steel with a Stainless Steel Effect finish. Ships via UPS/FedEx Ground.
(W = side to side) (D = front to back) (H = top to bottom)Available in 6-11/16" H, 7-1/2" H & 9-1/16" H
60° Angle with Base
Max Recommended Post Span: 35-7/16''
Ships via UPS/FedEx Ground
 | Great!!
by: Isa ✔Verified Buyer from: ELIZABETH, NJ on: April 10, 2018 |
| | My order came right away. I ordered (4) brackets ,they are a nice weight and the finish is nice. The hardest part about th his whole process is trying to download a picture to show how nice my project came out. They are a beautiful compliment to the counter top. I'm happy and excited!! Great service, thank you Kitchensource.
|
|
| Strong, stylish bar supports
by: Sarah ✔Verified Buyer from: Hoyt Lakes, MN on: February 21, 2017 |
| | We bought 4 of the Hafele Angled Countertop Supports for a raised quartz bar over an quartz island countertop. Our quartz installer hadn't ever worked with this style before. They did a wonderful job installing with the one page instruction sheet written in German. The bartop is 18" by 99" so has some weight to it. We ordered 4 supports based on the 88lb capacity and 36" max span. Our 4 are about 32" apart and are holding the quartz solidly anchored. We would purchase again.
|
|
 | I am hoping to get a dimension for the top mounting plate of this bar support - there does not seem to be a dimension for it in any of the cut sheets. Any help would much be appreciated.
Thanks. - Asked about product HA-505.23.021 |
| |  | The fixation plate is 90 mm x 90 mm x 3 mm (3.54" x 3.54" x 0.118").
|
| | | - Answered on August 10, 2016 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| I have a large (120inch x 15 inch) piece of wood that I will be using as a bar top. It weighs about 200 pounds.
1) How many of these supports do you recommend? I was going to order 8 when I was going to use a glass top but now this one is wood.
2) What is the maximum distance the outer edge of the bar can be from a Support? In other words, these are angled, which will help - but at what point do I need some other form of support?
Thank you! - Asked about product HA-505.23.021 |
| | | The maximum load capacity for these supports is 88 lbs per tube support. 8 of the supports would be fine to use, and Hafele recommends a maximum 9-7/8" of space from the support to the end of the top (as shown in the photo under dimensions).
|
| | | - Answered on November 9, 2015 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| What are the dimensions of the bolt fixing the angled breakfast bar support to the counter? - Asked about product HA-505.23.021 |
| | | It looks like the bolts are M8 x 55. Please see the mounting instructions here: https://www.kitchensource.com/table-bases/pdf/ha-505.23.021-spec.pdf
|
| | | - Answered on August 24, 2015 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| What is the angle of this bar support? - Asked about product HA-505.23.021 |
| | | 60 Degrees.
|
| | | - Answered on February 3, 2014 |
| | | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| I see that the maximum length of bar top is 9 7/8" from center of support to overhang, but what is the maximum overall size for the bar top? Or in other words, how far can top go in other direction? Customer wants an overall bar top width of 18".
Thanks,
Denise - Asked about product HA-505.23.021 |
| | | You can also go 9 7/8” in the other direction while not exceeding the 88 lb capacity.
|
| | | - Answered on September 18, 2014 |
| | | 67% of 6 people found this useful. Was this useful to you? Yes (4) | No (2) |
|
|
1.800.667.8721
Order Status
Kitchen Accessories
